• 社区
  • 存档
  • 存档
  • Nutanix CE 2018.05.01嵌套在ESXi上- open-vm-tools破坏CVM网络
问题

Nutanix CE 2018.05.01嵌套在ESXi上- open-vm-tools破坏CVM网络

  • 2018年7月18日
  • 4回复
  • 4的观点
B
徽章
  • 运行状态:CE 2018.05.01, 5节点集群
  • 嵌套在ESXi 6.5 vSphere 6.7下的主机下
  • ESXi网络Portgroup是Trunk提供Nutanix访问我们所有的vlan
  • 在每个节点上完成初始设置后，我运行ovs-vsctl set port br0 tag=11，将其置于VLAN 11上。这使得卫城的网络工作。
  • 然后，我使用SSH nutanix@192.168.5.2 SSH到CVM，并发出change_cvm_vlan 11，以便将VLAN标签获取到CVM，并使其联网工作。
  • 然后编辑/etc/resolv.conf，指向我们的内部域名服务器和搜索域。
  • 如果我在任何时候为了更好的性能而安装open-vm-tools，它会破坏CVM的网络，而我无论如何也不知道如何修复它。它会破坏内部的192.168.5.2连接和外部的CVM在VLAN 11上的IP。
  • 本指南如下:http://burmesecloud.blogspot.com/2016/11/nutanix-ce-nested-on-vmware-esxi-65.html
我希望您能提供关于如何在安装了open-vm-tools的情况下，在现有的5节点集群和新设置中正确地运行网络的任何信息。

谢谢!
    \r\n
  • Running: CE 2018.05.01, 5 node cluster \r\n
  • Nested Under ESXi 6.5 Host under vSphere 6.7 \r\n
  • ESXi Network Portgroup Is Trunk to provide Nutanix access to all of our VLANs \r\n
  • Once initial setup is completed on each node, I run ovs-vsctl set port br0 tag=11 to put it on VLAN 11. This makes networking for Acropolis work. \r\n
  • I then SSH into the CVM's using ssh nutanix@192.168.5.2 and issue change_cvm_vlan 11 to get the VLAN tag onto the CVM and make it's networking work. \r\n
  • I then edit \/etc\/resolv.conf to point to our internal nameservers and search domain. \r\n
  • If I at any point install open-vm-tools for better performance, it breaks the networking to the CVM and I cannot for the life of me figure out how to fix it. It breaks both the internal 192.168.5.2 connection and the external CVM IP on VLAN 11. \r\n
  • Following this guide: http:\/\/burmesecloud.blogspot.com\/2016\/11\/nutanix-ce-nested-on-vmware-esxi-65.html \r\n<\/ul>\r\nI would appreciate any information that you can pass on about how to get the networking properly running with open-vm-tools installed, both on an existing 5 node cluster and on a new setup.
    \r\n
    \r\nThanks!","quoteUsername":"bm-engops","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
    • 本主题已关闭供评论

    4回复

    andrew_ct
    Userlevel 5
    徽章 + 9
    你好,
    如果只使用缺省的vlan0，而不将节点放入vlan11，是否也会发生这种情况?
    \r\ndoes this happen also if you use only the default vlan0, without putting the nodes to vlan 11?","quoteUsername":"andrew_ct","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
    B
    徽章
    我还没有机会测试它，我现在就去做，然后回来报告。
    B
    徽章
    是的，当使用本机vlan时，它当然会中断。我在之前的CE版本中没有遇到过这个问题;事实上，我有一个更老的(2016年)集群运行，安装了VM工具，它没有这种损坏。
    B
    徽章
    还在寻找解决方案，有人有想法/想法/知识吗?
    Baidu