解决了

Nutanix网络可视化

m
徽章 +5
你好呀。

在QFX 5100开关上运行，Junos 14.1x53-d45.3似乎Prism的网络硬件 /交换机部分无法正常工作。我可以看到我的开关，但是看不到任何接口。SNMP V3和V2已启用和配置，CVM的SNMPWALK列出了很多。有人在杜松开关上工作吗？



图标

最好的答案Pchang2017年10月11日，16:36

查看原件
    \n
    \nRunning on QFX 5100 switches, with Junos 14.1X53-D45.3 it seems that the network hardware \/ switch part of Prism does not work correctly. I can see my switch, but i can't see any interfaces. SNMP v3 and V2 is enabled and configured, snmpwalk from cvm lists A LOT. Do anyone have this working on Juniper switches?
    \n
    \n
    \n
    \n

    <\/a><\/p>","quoteUsername":"m1kkel","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">

    该主题已关闭以供评论

    17个答复

    Pchang
    秩
    徽章 +6
    你好m1kkel

    我不知道该开关是否得到了专门支持，尽管是否符合RFC 2674的规定。除SNMP LLDP外，还必须在网络可视化的开关上启用。你知道这是吗？

    从文档中：”
    要跟踪和记录集群的网络统计信息，群集需要有关使用第一跳网络交换机和所使用的开关端口的信息。开关端口发现均由RFC 2674符合RFC 2674的开关支持。开关端口发现涉及从交换机上的Q-Bridge-MIB获取统计信息，然后识别与主机相对应的MAC地址。这种发现目前是最好的，因此有时可能不会发现接口。”

    和：”
    在第一跳开关上启用LLDP或CDP。可视化器使用LLDP或CDP来确定将哪个开关端口连接到给定的主机接口。如果无法使用LLDP或CDP，则使用SNMP数据最佳使用。有关配置LLDP或CDP的信息，请参见开关制造商的文档。”
    彼得
    m1kkel<\/a>
    \n
    \nI don't know if that switch is specifically supported though if it's RFC 2674 compliant it should work. In addition to SNMP LLDP must also be enabled on the the switch for network visualization. Do you know if it is?
    \n
    \nFrom the documentation:\"
    \nTo track and record networking statistics for a cluster, the cluster requires information about the first-hop network switches and the switch ports being used. Switch port discovery is supported with switches that are RFC 2674 compliant. Switch port discovery involves obtaining statistics from the Q-BRIDGE-MIB on the switch and then identifying the MAC address that corresponds to the host. Such discovery is currently best-effort, so it is possible that, at times, an interface might not be discovered.\"
    \n
    \nAnd:\"
    \nEnable LLDP or CDP on the first-hop switches. The visualizer uses LLDP or CDP to determine which switch port is connected to a given host interface. If LLDP or CDP is unavailable, SNMP data is used on a best-effort basis. For information about configuring LLDP or CDP, see the switch manufacturer\u2019s documentation.\"","quoteUsername":"pchang","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
    阿卢西亚尼
    UserLevel 7
    徽章 +34
    你好m1kkel

    如果发现任何答案有用，请考虑单击“接受为解决方案”按钮。这将帮助其他人找到材料并帮助整个社区。
    在Twitter上关注我：https：//twitter.com/angeloluciani
    m1kkel<\/a>
    \n
    \nIf you find any answers useful, please consider clicking the 'Accept as Solution' button. This will help others find the material and help the entire community.","quoteUsername":"aluciani","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
    m
    徽章 +5
    你好呀。

    感谢回复。

    LLDP已经启用了，Nutanix也可以看到VLAN接口。它只是无法进行可视化并显示端口统计。

    有任何想法吗？
    \n
    \nThanks for replying.
    \n
    \nLLDP is already enabled, and Nutanix see's the vlan interfaces as well. It is just not able to make the visualization, and show port stats.
    \n
    \nAny ideas?","quoteUsername":"m1kkel","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
    Pchang
    秩
    徽章 +6
    我不是该功能的专家，但这可能是一个解析问题。

    如果您进入AHV主机并运行命令“ LLDPCTL”，输出是什么？我可以在内部要求某人看看。
    彼得
    \n
    \nIf you ssh into the AHV host and run the command \"lldpctl\" what is the output? I can ask someone internally to take a look.","quoteUsername":"pchang","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
    m
    徽章 +5
    是的，请那样做。这是输出：

    LLDP邻居：---------------------------------------------------------------------------------------------------------------------------------------接口：ETH2，VIA：LLDP，RID：1，时间：6天，00：16：38CHASSIS：CHASSID：MAC 80AC：18：6E：C0SYSNAME：NSDISTSW01SYSDESCR：Juniper Networks，Inc。QFX5100-48S-6Q以太网交换机，Kernel Junos 14.1x53-d45.3，构建日期：2017-07-07-28 017-28 01：2017-07-28 01：31：44 UTC版权所有（C）1996-2017 Juniper Networks，Inc.ttl：120能力：桥梁，ONACACABIBLY：ROUTER：ROUTER，ONPORT：onport：pottid：local 508portdescr：XE-0/0/0/0/0/0MFS：9216PORT已聚集。PortAggregID: 635VLAN: 30 vlan-30VLAN: 31 vlan-31LLDP-MED:Device Type: Network Connectivity DeviceCapability: Capabilities, yesCapability: Policy, yesCapability: Location, yesCapability: MDI/PSE, yesUnknown TLVs:TLV: OUI: 00,90,69，亚型：1，LEN：12 54,41,33,37,31,31,35,34,34,37,37,37,31,35,35,35tlv：oui：00,90,69，子类型：2，Len：4 00，4 00，4 00，4 00，4 00，00,00,00 -------------------------------------------------------------------------------------------------------------------------------界面：ETH3，VIA：LLDP，RID：1，时间：6天，00：16：20chassis：Chassisid：Mac 80AC：18：6E：C0SYSNAME：NSDISTSW01SYSDESCR：Juniper Networks，Inc。QFX5100-48S-6Q Ethernet Switch，Kernel Junos Junos Junos 14.1x53-D45.3，构建日期：2017-07-07-28：2017-07-07-07-07-07-07-07-07-07-2801：31:44 UTC版权所有（C）1996-2017杜松网络，Inc.ttl：120能力：桥梁，Oncapability：Router：Router：Router，Onport：onport：portid：local 757portdescr：XE-1/0/0/0MFS：9216 PORTER聚合。PortAggregID: 635VLAN: 30 vlan-30VLAN: 31 vlan-31LLDP-MED:Device Type: Network Connectivity DeviceCapability: Capabilities, yesCapability: Policy, yesCapability: Location, yesCapability: MDI/PSE, yesUnknown TLVs:TLV: OUI: 00,90,69，亚型：1，LEN：12 54,41,33,37,31,31,35,34,34,34,36,30,30,30,30,39tlv：oui：00,90,69，子类型：2，Len：4 00，4 00，4 00，4 00，4 00，00,00,00 --------------------------------------------------------------------------------------------------------------------------------界面：ETH0，VIA：LLDP，RID：1，时间：6天，00：16：32CHASSIS：底盘：Mac 80AC：18：6E：C0SYSNAME：NSDISTSW01SYSDESCR：Juniper Networks，Inc。 01:31:44 UTC Copyright (c) 1996-2017 Juniper Networks, Inc.TTL: 120Capability: Bridge, onCapability: Router, onPort:PortID: local 519PortDescr: xe-0/0/8MFS: 9216Port is aggregated. PortAggregID: 623VLAN: 144 vlan-144VLAN: 145 vlan-145VLAN: 146 vlan-146VLAN: 147 vlan-147VLAN: 148 vlan-148LLDP-MED:Device Type: Network Connectivity DeviceCapability: Capabilities, yesCapability: Policy, yesCapability: Location, yesCapability: MDI/PSE, yesUnknown TLVs:TLV: OUI: 00,90,69, SubType: 1, Len: 12 54,41,33,37,31,35,34,37,30,31,35,35-------------------------------------------------------------------------------Interface: eth1, via: LLDP, RID: 1, Time: 6 days, 00:16:32Chassis:ChassisID: mac 80ac:18:6e:c0SysName: NSDISTSW01SysDescr: Juniper Networks, Inc. qfx5100-48s-6q Ethernet Switch, kernel JUNOS 14.1X53-D45.3, Build date: 2017-07-28 01:31:44 UTC Copyright (c) 1996-2017 Juniper Networks, Inc.TTL: 120Capability: Bridge, onCapability: Router, onPort:PortID: local 765PortDescr: xe-1/0/8MFS: 9216Port is aggregated. PortAggregID: 623VLAN: 144 vlan-144VLAN: 145 vlan-145VLAN: 146 vlan-146VLAN: 147 vlan-147VLAN: 148 vlan-148LLDP-MED:Device Type: Network Connectivity DeviceCapability: Capabilities, yesCapability: Policy, yesCapability: Location, yesCapability: MDI/PSE, yesUnknown TLVs:TLV: OUI: 00,90,69, SubType: 1, Len: 12 54,41,33,37,31,35,34,36,30,30,30,39-------------------------------------------------------------------------------[root@NSNTNXNODE01 ~]#
    \n
    \nLLDP neighbors:-------------------------------------------------------------------------------Interface: eth2, via: LLDP, RID: 1, Time: 6 days, 00:16:38Chassis:ChassisID: mac 80\ud83c\udde6\ud83c\udde8ac:18:6e:c0SysName: NSDISTSW01SysDescr: Juniper Networks, Inc. qfx5100-48s-6q Ethernet Switch, kernel JUNOS 14.1X53-D45.3, Build date: 2017-07-28 01:31:44 UTC Copyright (c) 1996-2017 Juniper Networks, Inc.TTL: 120Capability: Bridge, onCapability: Router, onPort:PortID: local 508PortDescr: xe-0\/0\/0MFS: 9216Port is aggregated. PortAggregID: 635VLAN: 30 vlan-30VLAN: 31 vlan-31LLDP-MED:Device Type: Network Connectivity DeviceCapability: Capabilities, yesCapability: Policy, yesCapability: Location, yesCapability: MDI\/PSE, yesUnknown TLVs:TLV: OUI: 00,90,69, SubType: 1, Len: 12 54,41,33,37,31,35,34,37,30,31,35,35TLV: OUI: 00,90,69, SubType: 2, Len: 4 00,00,00,00-------------------------------------------------------------------------------Interface: eth3, via: LLDP, RID: 1, Time: 6 days, 00:16:20Chassis:ChassisID: mac 80\ud83c\udde6\ud83c\udde8ac:18:6e:c0SysName: NSDISTSW01SysDescr: Juniper Networks, Inc. qfx5100-48s-6q Ethernet Switch, kernel JUNOS 14.1X53-D45.3, Build date: 2017-07-28 01:31:44 UTC Copyright (c) 1996-2017 Juniper Networks, Inc.TTL: 120Capability: Bridge, onCapability: Router, onPort:PortID: local 757PortDescr: xe-1\/0\/0MFS: 9216Port is aggregated. PortAggregID: 635VLAN: 30 vlan-30VLAN: 31 vlan-31LLDP-MED:Device Type: Network Connectivity DeviceCapability: Capabilities, yesCapability: Policy, yesCapability: Location, yesCapability: MDI\/PSE, yesUnknown TLVs:TLV: OUI: 00,90,69, SubType: 1, Len: 12 54,41,33,37,31,35,34,36,30,30,30,39TLV: OUI: 00,90,69, SubType: 2, Len: 4 00,00,00,00-------------------------------------------------------------------------------Interface: eth0, via: LLDP, RID: 1, Time: 6 days, 00:16:32Chassis:ChassisID: mac 80\ud83c\udde6\ud83c\udde8ac:18:6e:c0SysName: NSDISTSW01SysDescr: Juniper Networks, Inc. qfx5100-48s-6q Ethernet Switch, kernel JUNOS 14.1X53-D45.3, Build date: 2017-07-28 01:31:44 UTC Copyright (c) 1996-2017 Juniper Networks, Inc.TTL: 120Capability: Bridge, onCapability: Router, onPort:PortID: local 519PortDescr: xe-0\/0\/8MFS: 9216Port is aggregated. PortAggregID: 623VLAN: 144 vlan-144VLAN: 145 vlan-145VLAN: 146 vlan-146VLAN: 147 vlan-147VLAN: 148 vlan-148LLDP-MED:Device Type: Network Connectivity DeviceCapability: Capabilities, yesCapability: Policy, yesCapability: Location, yesCapability: MDI\/PSE, yesUnknown TLVs:TLV: OUI: 00,90,69, SubType: 1, Len: 12 54,41,33,37,31,35,34,37,30,31,35,35-------------------------------------------------------------------------------Interface: eth1, via: LLDP, RID: 1, Time: 6 days, 00:16:32Chassis:ChassisID: mac 80\ud83c\udde6\ud83c\udde8ac:18:6e:c0SysName: NSDISTSW01SysDescr: Juniper Networks, Inc. qfx5100-48s-6q Ethernet Switch, kernel JUNOS 14.1X53-D45.3, Build date: 2017-07-28 01:31:44 UTC Copyright (c) 1996-2017 Juniper Networks, Inc.TTL: 120Capability: Bridge, onCapability: Router, onPort:PortID: local 765PortDescr: xe-1\/0\/8MFS: 9216Port is aggregated. PortAggregID: 623VLAN: 144 vlan-144VLAN: 145 vlan-145VLAN: 146 vlan-146VLAN: 147 vlan-147VLAN: 148 vlan-148LLDP-MED:Device Type: Network Connectivity DeviceCapability: Capabilities, yesCapability: Policy, yesCapability: Location, yesCapability: MDI\/PSE, yesUnknown TLVs:TLV: OUI: 00,90,69, SubType: 1, Len: 12 54,41,33,37,31,35,34,36,30,30,30,39-------------------------------------------------------------------------------[root@NSNTNXNODE01 ~]#","quoteUsername":"m1kkel","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
    m
    徽章 +5
    你好。

    您是否删除了同事的最新消息，您是否删除了您的上一篇文章
    协议lldp port-id-subtype接口名称;接口全部；

    ？

    我在线程中找不到它，但是我的邮件中有回复。.只需要知道您是否提取答案？
    \n
    \nDid you delete your last post with the update from your colleague regarding
    \nprotocols lldp port-id-subtype interface-name; interface all;<\/i>
    \n
    \n??
    \n
    \nI cant find it in the thread, but i have the reponse in my mail.. just need to know if you withdraw your answer?","quoteUsername":"m1kkel","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
    Pchang
    秩
    徽章 +6
    我没有删除它，也不确定为什么它没有出现。该命令是否为解决该问题解决了吗？
    彼得
    m
    徽章 +5
    很奇怪，因为它在那里。

    我将尝试命令晚上，删除开关并再次读取它，我们将看到。

    我希望这样做。
    \n
    \nI will try the command thie evening, remove the switch and readd it again and we will see.
    \n
    \nI hope it does.","quoteUsername":"m1kkel","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
    m
    徽章 +5
    你好。

    我今天运行了命令，但是接口仍未显示在Nutanix Prism/Hardware/Switch选项卡中。

    这是LLDPCTL的新输出：

    LLDP邻居：-------------------------------------------------------------------------------------------------------------------------------------接口：ETH2，VIA：LLDP，RID：1，时间：0天，06：43：52CHASSIS：CHASSID：MAC 80AC：18：6E：C0SYSNAME：NSDISTSW01SYSDESCR：Juniper Networks，Inc。QFX5100-48S-6Q Ethernet Switch，Kernel Junos 14.1x53-D45.3，构建日期，构建日期：2017-07-28-07-28 01-8 01：2017-07-28 01：31:44 UTC Copyright (c) 1996-2017 Juniper Networks, Inc.TTL: 120Capability: Bridge, onCapability: Router, onPort:PortID: ifname xe-0/0/0PortDescr: xe-0/0/0MFS: 9216Port is aggregated. PortAggregID: 635VLAN: 30 vlan-30VLAN: 31 vlan-31LLDP-MED:Device Type: Network Connectivity DeviceCapability: Capabilities, yesCapability: Policy, yesCapability: Location, yesCapability: MDI/PSE, yesUnknown TLVs:TLV: OUI: 00,90,69, SubType: 1, Len: 12 54,41,33,37,31,35,34,37,30, 31,35,35TLV: OUI: 00,90,69, SubType: 2, Len: 4 00,00,00,00-------------------------------------------------------------------------------Interface: eth3, via: LLDP, RID: 1, Time: 0 day, 06:43:52Chassis:ChassisID: mac 80ac:18:6e:c0SysName: NSDISTSW01SysDescr: Juniper Networks, Inc. qfx5100-48s-6q Ethernet Switch, kernel JUNOS 14.1X53-D45.3, Build date: 2017-07-28 01:31:44 UTC Copyright (c) 1996-2017 Juniper Networks, Inc.TTL: 120Capability: Bridge, onCapability: Router, onPort:PortID: ifname xe-1/0/0PortDescr: xe-1/0/0MFS: 9216Port is aggregated. PortAggregID: 635VLAN: 30 vlan-30VLAN: 31 vlan-31LLDP-MED:Device Type: Network Connectivity DeviceCapability: Capabilities, yesCapability: Policy, yesCapability: Location, yesCapability: MDI/PSE, yesUnknown TLVs:TLV: OUI: 00,90,69, SubType: 1, Len: 12 54,41,33,37,31,35,34,36,30, 30,30,39TLV: OUI: 00,90,69, SubType: 2, Len: 4 00,00,00,00-------------------------------------------------------------------------------Interface: eth0, via: LLDP, RID: 1, Time: 0 day, 06:43:52Chassis:ChassisID: mac 80ac:18:6e:c0SysName: NSDISTSW01SysDescr: Juniper Networks, Inc. qfx5100-48s-6q Ethernet Switch, kernel JUNOS 14.1X53-D45.3, Build date: 2017-07-28 01:31:44 UTC Copyright (c) 1996-2017 Juniper Networks, Inc.TTL: 120Capability: Bridge, onCapability: Router, onPort:PortID: ifname xe-0/0/8PortDescr: xe-0/0/8MFS: 9216Port is aggregated. PortAggregID: 623VLAN: 144 vlan-144VLAN: 145 vlan-145VLAN: 146 vlan-146VLAN: 147 vlan-147VLAN: 148 vlan-148LLDP-MED:Device Type: Network Connectivity DeviceCapability: Capabilities, yesCapability: Policy, yesCapability: Location, yesCapability: MDI/PSE, yesUnknown TLVs:TLV: OUI: 00,90,69, SubType: 1, Len: 12 54,41,33,37,31,35,34,37,30, 31,35,35-------------------------------------------------------------------------------Interface: eth1, via: LLDP, RID: 1, Time: 0 day, 06:43:52Chassis:ChassisID: mac 80ac:18:6e:c0SysName: NSDISTSW01SysDescr: Juniper Networks, Inc. qfx5100-48s-6q Ethernet Switch, kernel JUNOS 14.1X53-D45.3, Build date: 2017-07-28 01:31:44 UTC Copyright (c) 1996-2017 Juniper Networks, Inc.TTL: 120Capability: Bridge, onCapability: Router, onPort:PortID: ifname xe-1/0/8PortDescr: xe-1/0/8MFS: 9216Port is aggregated. PortAggregID: 623VLAN: 144 vlan-144VLAN: 145 vlan-145VLAN: 146 vlan-146VLAN: 147 vlan-147VLAN: 148 vlan-148LLDP-MED:Device Type: Network Connectivity DeviceCapability: Capabilities, yesCapability: Policy, yesCapability: Location, yesCapability: MDI/PSE, yesUnknown TLVs:TLV:
    \n
    \nI ran the command today, but the interfaces are still not showing in Nutanix Prism\/hardware\/Switch tab.
    \n
    \nHere is the new output of lldpctl:
    \n
    \nLLDP neighbors:-------------------------------------------------------------------------------Interface: eth2, via: LLDP, RID: 1, Time: 0 day, 06:43:52Chassis:ChassisID: mac 80\ud83c\udde6\ud83c\udde8ac:18:6e:c0SysName: NSDISTSW01SysDescr: Juniper Networks, Inc. qfx5100-48s-6q Ethernet Switch, kernel JUNOS 14.1X53-D45.3, Build date: 2017-07-28 01:31:44 UTC Copyright (c) 1996-2017 Juniper Networks, Inc.TTL: 120Capability: Bridge, onCapability: Router, onPort:PortID: ifname xe-0\/0\/0PortDescr: xe-0\/0\/0MFS: 9216Port is aggregated. PortAggregID: 635VLAN: 30 vlan-30VLAN: 31 vlan-31LLDP-MED:Device Type: Network Connectivity DeviceCapability: Capabilities, yesCapability: Policy, yesCapability: Location, yesCapability: MDI\/PSE, yesUnknown TLVs:TLV: OUI: 00,90,69, SubType: 1, Len: 12 54,41,33,37,31,35,34,37,30, 31,35,35TLV: OUI: 00,90,69, SubType: 2, Len: 4 00,00,00,00-------------------------------------------------------------------------------Interface: eth3, via: LLDP, RID: 1, Time: 0 day, 06:43:52Chassis:ChassisID: mac 80\ud83c\udde6\ud83c\udde8ac:18:6e:c0SysName: NSDISTSW01SysDescr: Juniper Networks, Inc. qfx5100-48s-6q Ethernet Switch, kernel JUNOS 14.1X53-D45.3, Build date: 2017-07-28 01:31:44 UTC Copyright (c) 1996-2017 Juniper Networks, Inc.TTL: 120Capability: Bridge, onCapability: Router, onPort:PortID: ifname xe-1\/0\/0PortDescr: xe-1\/0\/0MFS: 9216Port is aggregated. PortAggregID: 635VLAN: 30 vlan-30VLAN: 31 vlan-31LLDP-MED:Device Type: Network Connectivity DeviceCapability: Capabilities, yesCapability: Policy, yesCapability: Location, yesCapability: MDI\/PSE, yesUnknown TLVs:TLV: OUI: 00,90,69, SubType: 1, Len: 12 54,41,33,37,31,35,34,36,30, 30,30,39TLV: OUI: 00,90,69, SubType: 2, Len: 4 00,00,00,00-------------------------------------------------------------------------------Interface: eth0, via: LLDP, RID: 1, Time: 0 day, 06:43:52Chassis:ChassisID: mac 80\ud83c\udde6\ud83c\udde8ac:18:6e:c0SysName: NSDISTSW01SysDescr: Juniper Networks, Inc. qfx5100-48s-6q Ethernet Switch, kernel JUNOS 14.1X53-D45.3, Build date: 2017-07-28 01:31:44 UTC Copyright (c) 1996-2017 Juniper Networks, Inc.TTL: 120Capability: Bridge, onCapability: Router, onPort:PortID: ifname xe-0\/0\/8PortDescr: xe-0\/0\/8MFS: 9216Port is aggregated. PortAggregID: 623VLAN: 144 vlan-144VLAN: 145 vlan-145VLAN: 146 vlan-146VLAN: 147 vlan-147VLAN: 148 vlan-148LLDP-MED:Device Type: Network Connectivity DeviceCapability: Capabilities, yesCapability: Policy, yesCapability: Location, yesCapability: MDI\/PSE, yesUnknown TLVs:TLV: OUI: 00,90,69, SubType: 1, Len: 12 54,41,33,37,31,35,34,37,30, 31,35,35-------------------------------------------------------------------------------Interface: eth1, via: LLDP, RID: 1, Time: 0 day, 06:43:52Chassis:ChassisID: mac 80\ud83c\udde6\ud83c\udde8ac:18:6e:c0SysName: NSDISTSW01SysDescr: Juniper Networks, Inc. qfx5100-48s-6q Ethernet Switch, kernel JUNOS 14.1X53-D45.3, Build date: 2017-07-28 01:31:44 UTC Copyright (c) 1996-2017 Juniper Networks, Inc.TTL: 120Capability: Bridge, onCapability: Router, onPort:PortID: ifname xe-1\/0\/8PortDescr: xe-1\/0\/8MFS: 9216Port is aggregated. PortAggregID: 623VLAN: 144 vlan-144VLAN: 145 vlan-145VLAN: 146 vlan-146VLAN: 147 vlan-147VLAN: 148 vlan-148LLDP-MED:Device Type: Network Connectivity DeviceCapability: Capabilities, yesCapability: Policy, yesCapability: Location, yesCapability: MDI\/PSE, yesUnknown TLVs:TLV:","quoteUsername":"m1kkel","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
    m
    徽章 +5
    在我的杜松VC上显示LLDP邻居是空的。

    Mikkel@nsdistsw01>显示LLDP邻居
    {Master：0}
    \n
    \nmikkel@NSDISTSW01> show lldp neighbors
    \n{master:0}","quoteUsername":"m1kkel","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
    m
    UserLevel 2
    徽章 +5
    Prism 5.1指南指出：“网络可视化器支持以下开关：Cisco Nexus系列开关，Cisco Catalyst系列开关，Dell Switches，Arista Switches”。

    这个列表很长一段时间没有变化，我们也因极端开关而失败。
    \n
    \nThis list has not changed in a long time and we have failed with Extreme switches as well.","quoteUsername":"MMSW_DE","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
    m
    徽章 +5
    我知道，但是有人认为如果我们给了开关上面所述的命令，它可以起作用
    Pchang
    秩
    徽章 +6
    正确，目前不支持它，因为根本没有测试解析杜松的输出。我共享信息以使杜松开关更改其输出过去似乎对其他人工作的信息的方式，但不幸的是，在这种情况下，这似乎不起作用。我确实看到有一个内部机票可以增强发现工具以正确解析杜松输出，但目前没有ETA。
    彼得
    s
    徽章 +3
    我们正在运行Arista Switch，我只能看到3个端口，而不是所有内容 - 不知道为什么。

    每个开关的结果也不同 - 可见不同的端口等。
    \n
    \nThe results are different for each switch as well - different ports visible etc.","quoteUsername":"sarbaron","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
    m
    徽章 +5
    感谢您的信息。我希望我们能够使它起作用。谢谢你的时间
    我
    Helo家伙，

    我正在QFX 5110上运行Prism 5.10.3和Junos 18.4，并且在配置Junos以发送接口名称而不是接口ID之后，可视化就可以了。
    _
    设置协议lldp port-id-subtype接口名称
    设置协议LLDP接口全部
    _

    其他所有内容都是Junos和Nutanix的默认设置。
    Prism网络可视化和图形工作正常。
    此致，

    伊维林
    \r\n
    \r\nI'm running Prism 5.10.3 and JunOS 18.4 on QFX 5110 and the visualisation worked right after I configured the JunOS to send interface names instead of interface IDs.
    \r\n_
    \r\nset protocols lldp port-id-subtype interface-name
    \r\nset protocols lldp interface all
    \r\n_
    \r\n
    \r\nEverything else is default settings in both JunOS and Nutanix.
    \r\nThe Prism Network visualisation and graphs work just fine.
    \r\nBest regards,
    \r\n
    \r\nIvelin","quoteUsername":"Ivelin","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
    j

    Nutanix可以将代码更新以与接口ID一起使用，因为这是各种类型的网络交换设备的常见实现？

    Can Nutanix update the code to work with Interface ID\u2019s as this is a common implementation on various types of Network Switch equipment?<\/p>","quoteUsername":"jbudding","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
    Baidu