Join this episode for more Stories from the EUC Road as Sean Donahue (Nutanix) and Al Solorzano (E360) tackle this all too familiar question. But does it have to an \u201cOR\u201d statement? Can you have an \u201cAND\u201d statement instead? Tune in to learn more about performance in EUC, happy employees and how you might sleep better at night in the age of Malware and Ransomware.<\/p><\/oembed>

Resources<\/p>

解决了

应用程序管理（镇定）是否支持prismentral 5.8中的ESXI？

  • 2018年8月1日
  • 7个答复
  • 2635次观看
w
  • weiyi
  • 冒险家
  • 4个答复
我用ESXI 6.5部署了Nutanix群集（AOS版本5.8）。我在上面部署了Prism Central 5.8。互联网上有一些文章，称应用程序管理支持ESXI，从PrismCentral版本5.7开始。是真的吗？



就我而言，我找不到自我服务和应用程序从下拉列表中，当我在PrismCentral 5.8的主菜单中单击“问号”图标时。我确实看到“ PC扩展”，“启用应用管理”和“微分析”，但不是”，但不是”自助服务和应用程序”。



当我单击“启用应用管理”时，我会看到以下错误。


  • Precheck失败：
主机群集注册

请检查是否注册了此Prism Central的集群。



我已经将Nutanix群集注册到了这个prismentral中。在我看来，应用程序管理或自助服务不支持ESXI，对吗？还是我错过了什么？
图标

最好的答案calm_mark2018年8月2日，19:37

@weiyi<\/user-mention> Good, it appears you've followed the documentation procedures for set up.
\r\n
\r\nAside from going into troubleshooting the logs on the CVMs on a deeper level, we've gone past my troubleshooting abilities and we'll have to see if anyone else in the community can help. I'm sorry, I don't have the ability to reproduce your setup to help you further.
\r\n
\r\nYou are correct: community support is the best we can offer you unless you're willing to change this to a supported cluster.
\r\n
\r\nUpdate: I've conferred with my colleagues and there is an issue with the latest VMWare ESX 6.5 and activation of Calm in Prism Central: it was identified in the Prism Central 5.8 Release Notes: Known Issues<\/a> section.
\r\n
\r\nThe Calm team has a fix in code review and then it will be ready for release planning, so I can't give you a firm date yet. In the meantime, please see this Knowledge Base article = https:\/\/portal.nutanix.com\/kb\/5553<\/a> for a workaround with your current installation.
\r\n
\r\nOur apologies for the inconvenience!
\r\n--Mark","className":"post__content__best_answer"}">
查看原件

\r\n

\r\nIn my case, I can't find Self Service & Apps<\/b> from the pull-down list, when I click question mark icon in the main menu on PrismCentral 5.8. I did see \"PC Scale out\", \"Enable app management\" and \"Microsegmentation\", but not \"Self Service & Apps\".<\/b>

\r\n

\r\nWhen I click \"Enable app management\", I see the following error.

\r\n

    \r\n
  • Precheck failures:
    \r\n<\/ul> Host Cluster Registered

    \r\n Please check that the cluster on which this Prism Central is hosted is registered to it.

    \r\n

    \r\nI had already registered my Nutanix cluster into this PrismCentral. It looks to me that App management or self service doesn't support ESXi, correct? Or is there anything I missed?","quoteUsername":"weiyi","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
该主题已关闭以供评论

7个答复

C
秩
UserLevel 2
徽章 +2
你好 @Weiyi，，，，



是的，自5月份第5.7版以来，在Nutanix .Nutanix .Next美国会议之前，Prism Central内部的平静支持Nutanix集群的ESX工作负载。



“启用应用管理”很平静！



本段具有前瞻性陈述；验证Nutanix在做出任何其他购买决策之前已将这些功能发货。随着时间的流逝，您会看到平静的团队将当前的“自助服务和应用程序”经验带入平静，从下一个主要版本作为Prism Central 5.9的下一个主要版本开始。您会看到平静持续融合到棱镜并与其他产品保持一致，例如Beam for Application总拥有成本。



现在，在您的问题上：很难在没有更多信息的情况下完全解决问题，但是似乎您的Nutanix群集带有ESX，但由于Prism Central并未完全注册为PE，因此没有加起来。



在里面Nutanix支持门户，请查看文档>软件>Prism Central 5.8指南，我指出了您的过程，以解开Prism Central并销毁PC VM，因此您可以尝试再次在群集中正确注册Prism Central。您应该执行NCC检查，以确保您的群集在Prism Central再次启动之前处于最佳状态。



此外，您应该在“启用应用程序管理”之前确保启用Prism Central VM的内存热添加，请参见：在Nutanix VMware群集上保持平静，我相信我们会在AHV上自动执行此操作。



我强烈建议您在执行此操作之前先致电Nutanix支持，以便他们在此过程中为您提供帮助，回答问题并进一步解决问题。



感谢您尝试冷静！

- 标记
@weiyi<\/user-mention> ,

\r\n

\r\nYes, Calm inside of Prism Central has supported ESX workloads on and off Nutanix clusters since release 5.7 back in May, right before the Nutanix .Next US conference.

\r\n

\r\n\"Enable App Management\" is Calm!

\r\n

\r\nThis paragraph has forward looking statements; verify Nutanix has shipped these features before making any additional purchasing decisions. You will see the Calm team drive the current \"Self Service & Apps\" experience into Calm over time, starting with the next major release targeted as Prism Central 5.9 before the end of the calendar year. You will see a continued convergence of Calm into Prism and alignment with other products, such as Beam for application total cost of ownership.

\r\n

\r\nNow, onto your question: it's hard to troubleshoot fully without more information, but it seems as if you have fresh Nutanix cluster with ESX, but something does not add up because Prism Central is not fully registered to PE.

\r\n

\r\nIn the Nutanix Support Portal<\/a>, please review the Documentation > Software > Prism Central 5.8 Guide<\/a>, I've pointed you to the procedure to unregister Prism Central and destroy the PC VM(s) so you can try to launch Prism Central again properly registered with your cluster. You should perform a NCC check to insure your cluster is in the best state before Prism Central launching again.

\r\n

\r\nFurthermore, you should insure memory hot add is enabled for Prism Central VMs before \"Enabling App Management,\" see: Enabling Calm on a Nutanix VMWare cluster,<\/a> I believe we do this automatically on AHV.

\r\n

\r\nI would strongly suggest you call Nutanix Support before you do any of this so they can help you along the way, answer questions, and troubleshoot further.

\r\n

\r\nThanks for trying Calm!

\r\n--Mark","quoteUsername":"calm_mark","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
w
标记，

我如文档所述未从PC中注册PE。然后，我以“从磁盘删除”的作用删除了vCenter的PC。之后，我将PE从5.8升级到5.8.0.1。



然后部署了5.8.0.1版本的PC。但是在部署PC后，PE未自动注册到PC中。但是，正如我记得的那样，PE之前应在PC部署之前自动注册到PC中，对吗？



PC部署后，我将PE手动注册到PC中。应用管理仍然不起作用。它显示了“主机群集注册：请检查托管中心的群集是否已注册到它。”，当我启动“启用应用程序管理”时。



我在PE和PC上运行了“ NCC Health_checks Run_all”。他们俩看起来都不错。这是输出：



棱镜元素：



ondisk_dedup_enabled_check的详细信息：

节点172.29.0.8：

信息：在磁盘defup上被Stargate禁用。

有关ONDISK_DEDUP_ENABLD_ENABLED_CHECK或与：NCC Health_Checks stargate_checks ondisk_dededup_enabled_checks ondedep_checks ondedep_enabled_check，请参阅KB 1851（http://portal.nutanix.com/kb/1851））



DNS_SERVER_CHECK的详细信息：

节点172.29.0.8：

信息：仅配置了一个名称服务器

节点172.29.0.7：

信息：仅配置了一个名称服务器

节点172.29.0.13：

信息：仅配置了一个名称服务器

有关DNS_Server_Check或Recheck的详细信息，请参阅KB 3005（http://portal.nutanix.com/kb/3005）。



ipmi_sensor_threshold_check的详细信息：

节点172.29.0.8：

失败：风扇速度低

err：收到无效的传感器信息

有关IPMI_SENSOR_THRESHOLD_CHECK或与：NCC Health_Checks Hardware_Checks IPMI_CHECKS IPMI_SENSOR_SENSOR_THRESOL_CHECK -CVM_CLIST -CVM_LIST = 172.24.88，请参阅KB 1524（http://portal.nutanix.com/kb/1524））

+------------------+

|状态|计数|

+------------------+

|通过|200 |

|信息|2 |

|错误|1 |

|总计|203 |

+------------------+

插件输出写入/home/nutanix/data/logs/ncc-output-latest.log



prismentral：



DNS_SERVER_CHECK的详细信息：

节点172.29.17.185：

信息：仅配置了一个名称服务器

有关DNS_Server_Check或Recheck的详细信息，请参阅KB 3005（http://portal.nutanix.com/kb/3005）。

+------------------+

|状态|计数|

+------------------+

|通过|24 |

|信息|1 |

|总计|25 |

+------------------+

插件输出写入/home/nutanix/data/logs/ncc-output-latest.log



而且，我还在PE和PC上运行了“ NCLI多簇GET-CLUST-STATE”的命令。PE看起来不错。但是PC显示为“多簇”为false。这是对的吗？我还能检查什么？



棱镜元素：



集群ID：99E63133-E634-4836-98DA-3E69B519CC40

集群名称：未命名

是多群集：true

控制器VM IP addre ...：[172.29.17.185]

外部IP地址：

标记要删除：false

存在远程连接：true



棱镜中央：



集群ID：00057053-E34B-795D-41CC-0894EF0339F0

群集名称：测试库

是多群集：false

控制器VM IP添加...：[172.29.0.7，172.29.0.8，172.29.0.13]

外部IP地址：

标记要删除：false

存在远程连接：true

\r\nI unregistered the PE from PC as described by the document. And I removed the PC in vCenter, with the action of \"Delete from disk\". After that, I upgrade PE from 5.8 to 5.8.0.1.

\r\n

\r\nAnd then deployed a PC of version 5.8.0.1. But after PC was deployed, PE was not registered into PC automatically. But as I remember, PE should be registered into PC automatically after PC deployment before, correct?

\r\n

\r\nAfter PC deployment, I registered PE into PC manually. The App management still doesn't work. It shows the error of \"Host Cluster Registered: Please check that the cluster on which this Prism Central is hosted is registered to it.\", when I launch \"Enable app management\".

\r\n

\r\nI ran the \"ncc health_checks run_all\" on both PE and PC. Both of them looks good. Here's the output:

\r\n

\r\nPrism Element:

\r\n

\r\nDetailed information for ondisk_dedup_enabled_check:

\r\nNode 172.29.0.8:

\r\nINFO: On Disk Dedup is disabled by Stargate.

\r\nRefer to KB 1851 (http:\/\/portal.nutanix.com\/kb\/1851) for details on ondisk_dedup_enabled_check or Recheck with: ncc health_checks stargate_checks ondisk_dedup_enabled_check

\r\n

\r\nDetailed information for dns_server_check:

\r\nNode 172.29.0.8:

\r\nINFO: Only one name server is configured

\r\nNode 172.29.0.7:

\r\nINFO: Only one name server is configured

\r\nNode 172.29.0.13:

\r\nINFO: Only one name server is configured

\r\nRefer to KB 3005 (http:\/\/portal.nutanix.com\/kb\/3005) for details on dns_server_check or Recheck with: ncc health_checks system_checks dns_server_check --cvm_list=172.29.0.8,172.29.0.7,172.29.0.13

\r\n

\r\nDetailed information for ipmi_sensor_threshold_check:

\r\nNode 172.29.0.8:

\r\nFAIL: Fan Speed Low

\r\nERR : Invalid sensor info received

\r\nRefer to KB 1524 (http:\/\/portal.nutanix.com\/kb\/1524) for details on ipmi_sensor_threshold_check or Recheck with: ncc health_checks hardware_checks ipmi_checks ipmi_sensor_threshold_check --cvm_list=172.29.0.8

\r\n+---------------+

\r\n| State | Count |

\r\n+---------------+

\r\n| Pass | 200 |

\r\n| Info | 2 |

\r\n| Error | 1 |

\r\n| Total | 203 |

\r\n+---------------+

\r\nPlugin output written to \/home\/nutanix\/data\/logs\/ncc-output-latest.log

\r\n

\r\nPrismCentral:

\r\n

\r\nDetailed information for dns_server_check:

\r\nNode 172.29.17.185:

\r\nINFO: Only one name server is configured

\r\nRefer to KB 3005 (http:\/\/portal.nutanix.com\/kb\/3005) for details on dns_server_check or Recheck with: ncc health_checks system_checks dns_server_check --cvm_list=172.29.17.185

\r\n+---------------+

\r\n| State | Count |

\r\n+---------------+

\r\n| Pass | 24 |

\r\n| Info | 1 |

\r\n| Total | 25 |

\r\n+---------------+

\r\nPlugin output written to \/home\/nutanix\/data\/logs\/ncc-output-latest.log

\r\n

\r\nAnd also I ran the command of \"ncli multicluster get-cluster-state\" on both PE and PC. PE looks good. But PC shows \"Is Multicluster\" as false. Is it correct? What else I could check?

\r\n

\r\nPrism Element:

\r\n

\r\n Cluster Id : 99e63133-e634-4836-98da-3e69b519cc40

\r\n Cluster Name : Unnamed

\r\n Is Multicluster : true

\r\n Controller VM IP Addre... : [172.29.17.185]

\r\n External IP Address :

\r\n Marked for Removal : false

\r\n Remote Connection Exists : true

\r\n

\r\nPrism Central:

\r\n

\r\n Cluster Id : 00057053-e34b-795d-41cc-0894ef0339f0

\r\n Cluster Name : TestCluster

\r\n Is Multicluster : false

\r\n Controller VM IP Addre... : [172.29.0.7, 172.29.0.8, 172.29.0.13]

\r\n External IP Address :

\r\n Marked for Removal : false

\r\n Remote Connection Exists : true","quoteUsername":"weiyi","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
w
顺便说一句，除了“启用应用程序管理”外，一切似乎都很好。我可以在PC中看到PE群集。我可以在PC中看到所有VM，容器，警报等。
C
秩
UserLevel 2
徽章 +2
@Weiyi感谢您提供该信息：除了未定义的外部IP，除了外部IPS外，没有什么立即突出的。



PC上的多群集可能表明您将PC部署为一个实例，而不是按比例输出选项。



请检查两个项目：



1）在PE上，您可以定义数据服务IP吗？平静使用此将日志存储在集群上的雅典卫城存储上。



2）您能否检查在“启用应用程序管理”之前，启用Prism Central VM的内存热添加，请参见：在Nutanix VMware群集上保持平静？



如果您已经完成了两者，那么我建议此时致电Nutanix支持。

- 标记
@weiyi<\/user-mention> Thanks for providing that information: nothing stands out immediately to me except external IPs not being defined.

\r\n

\r\nMulticluster on PC probably indicates that you deployed PC as a single instance, not with the scale-out option.

\r\n

\r\nPlease check on two items:

\r\n

\r\n1) On PE, can you define an Data Service IP? Calm uses this to store logs on Acropolis storage on the cluster.

\r\n

\r\n2) Could you check that memory hot add is enabled for Prism Central VMs before \"Enabling App Management,\" see: Enabling Calm on a Nutanix VMWare cluster<\/a>?

\r\n

\r\nIf you have already done both, then I'd recommend calling Nutanix Support at this time.

\r\n--Mark","quoteUsername":"calm_mark","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
w
是的，我在Prism元素中配置了“ ISCSI数据服务IP”。而且我还检查了我的vCenter 6.5，“ mem.hotadd”的值是“ true”。



您认为需要设置外部IP吗？5.8.0.1是一个社区版本，但不是公共版本。我可以打电话给Nutanix支持吗？

\r\n

\r\nDo you think the external IP need to be set? 5.8.0.1 is a community version, but not a public one. Can I call Nutanix support?","quoteUsername":"weiyi","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
C
秩
UserLevel 2
徽章 +2
@Weiyi很好，看来您遵循了文档程序进行设置。



除了要在更深层次的情况下对CVM上的日志进行故障排除外，我们已经超越了我的故障排除能力，我们必须看看社区中的其他任何人是否可以提供帮助。对不起，我没有能力复制您的设置来帮助您进一步帮助您。



您是正确的：除非您愿意将其更改为受支持的集群，否则社区支持是我们可以为您提供的最好的。



更新：我已经与我的同事会议，最新的VMware ESX 6.5和Prism Central中的平静激活存在问题：它已在Prism Central 5.8发行说明：已知问题部分。



平静团队有一个修复代码审查的修复程序，然后将准备好发布计划，因此我还不能给您确定的约会。同时，请参阅此知识库文章=https://portal.nutanix.com/kb/5553对于您当前的安装进行解决方法。



我们为给您带来的不便而表示歉意！

- 标记
@weiyi<\/user-mention> Good, it appears you've followed the documentation procedures for set up.

\r\n

\r\nAside from going into troubleshooting the logs on the CVMs on a deeper level, we've gone past my troubleshooting abilities and we'll have to see if anyone else in the community can help. I'm sorry, I don't have the ability to reproduce your setup to help you further.

\r\n

\r\nYou are correct: community support is the best we can offer you unless you're willing to change this to a supported cluster.

\r\n

\r\nUpdate: I've conferred with my colleagues and there is an issue with the latest VMWare ESX 6.5 and activation of Calm in Prism Central: it was identified in the Prism Central 5.8 Release Notes: Known Issues<\/a> section.

\r\n

\r\nThe Calm team has a fix in code review and then it will be ready for release planning, so I can't give you a firm date yet. In the meantime, please see this Knowledge Base article = https:\/\/portal.nutanix.com\/kb\/5553<\/a> for a workaround with your current installation.

\r\n

\r\nOur apologies for the inconvenience!

\r\n--Mark","quoteUsername":"calm_mark","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
w
KB起作用https://portal.nutanix.com/kb/5553



我在Google上搜索了错误消息。但是我没有找到KB或任何有用的信息。它现在起作用。非常感谢！
https:\/\/portal.nutanix.com\/kb\/5553<\/a>

\r\n

\r\nI searched the error message on google. But I didn't find the KB or any useful information. It works now. Thank you very much!","quoteUsername":"weiyi","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
条款和条件
Learn more about our cookies.<\/a>","cookiepolicy.button":"Accept cookies","cookiepolicy.button.deny":"Deny all","cookiepolicy.link":"Cookie settings","cookiepolicy.modal.title":"Cookie settings","cookiepolicy.modal.content":"We use 3 different kinds of cookies. You can choose which cookies you want to accept. We need basic cookies to make this site work, therefore these are the minimum you can select. Learn more about our cookies.<\/a>","cookiepolicy.modal.level1":"Basic
Functional","cookiepolicy.modal.level2":"Normal
Functional + analytics","cookiepolicy.modal.level3":"Complete
Functional + analytics + social media + embedded videos"}}}">
Baidu