将新节点添加到现有配置的Nutanix块中

  • 2015年8月11日
  • 5个答复
  • 1640次观看
r
Userlevel 1
徽章 +9
亲爱的，
一年多以前，我已经配置了3个节点Nutanix块（NX-1000系列），现在我们的客户要求将enew node（NX-3000 Serie）添加到现有群集中。节点不影响运行节点？

问候，
    \nI have aleady configured 3 nodes Nutanix block(NX-1000 series) more than year ago ,and now our customer requested anew node (NX-3000 serie) to be added into existing cluster.Could you please letme know the best way to add this node without impacting the running nodes?
    \n
    \nRegards,","quoteUsername":"rami","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
    该主题已关闭以供评论

    5个答复

    t
    UserLevel 2
    徽章 +14
    特殊限制适用于一些NX-1000节点 - 即，如果我没记错的话，您不能将1 Gig以太网节点与10 Gig以太网节点混合。但是，如果您的节点都是10 gig，那么您只需遵循标准添加过程，该过程不会影响Nutanix群集的可用性。史蒂文·poitras（Steven Poitras）有一个很好的博客 /w视频，添加一个新节点（如果它是一个节点或整个节点块，则没有程序差异）：

    http://stevenpoitras.com/2013/07/advanced-nutanix-add-node/
    r
    Userlevel 1
    徽章 +9
    谢谢您的回复。
    具有3个节点的设备使用1G连接连接，因为客户环境没有10 g，并且还将使用1G网络连接新的节点3000系列。
    \nThe appliance with 3 nodes are connected using 1G connectivity since there are no 10 G at the customer environment and going to connect the new node 3000 series using 1G network as well.","quoteUsername":"rami","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
    j
    徽章 +4
    根据建议，Nutanix指南不采用此操作。1G开关无法处理流量。
    Virtualizecr
    徽章 +4
    不建议这样做，但它会起作用，但是我有一个设置工作，但是，建议您的客户在可能的情况下升级到10GB开关，因为无法保证1GB的性能。

    1GB的问题基于在节点之间移动的元数据量。

    这来自Nutanix圣经（Steven Poitras）：

    看带宽
    对于传统存储，I/O有几种主要媒体类型：
    • 光纤通道（FC）[列表]
    • 4-，8-和10-GB
  • 以太网（包括fcoe）
    • 1-，10-GB，（40-GB IB），等。
    [/list]对于以下计算，我们使用的是500MB/s读取和460MB/s Write BW可从Intel S3700获得。
    计算如下：
    numssd = rougnup（（（numConnections * connbw（in GB/ s）））/ ssdbw（r或w））
    笔记：数字被四舍五入，因为不可能进行部分SSD。这也不考虑处理所有I/O所需的必要CPU，并假设无限制控制器CPU功率。
    饱和网络需要网络BWSSD
    控制器ConnecterAvailable网络BWREAD I/OWRITE I/O
    双4GB FC8GB == 1GB23
    双8GB FC16GB == 2GB45
    双16GB FC32GB == 4GB89
    双1GB ETH2GB == 0.25GB11
    双10GB ETH20GB == 2.5GB56
    如表所示，如果您想利用SSD可以提供的理论最大性能，则该网络可以成为一个瓶颈，根据利用的网络类型，该网络在1到9个SSD中的任何位置都可以
    • \n
    \nThe problem with 1Gb is based on the amount of metadata being moved between the nodes.
    \n
    \nThis comes from Nutanix Bible (Steven Poitras):
    \n
    \nLooking at the Bandwidth
    \nFor traditional storage, there are a few main types of media for I\/O:
    \n
      \n
    • Fiber Channel (FC)[list] \n
    • 4-, 8-, and 10-Gb<\/ul>\n
    • Ethernet (including FCoE)
        \n
      • 1-, 10-Gb, (40-Gb IB), etc.<\/ul>[\/list]For the calculation below, we are using the 500MB\/s Read and 460MB\/s Write BW available from the Intel S3700.
        \nThe calculation is done as follows:
        \nnumSSD = ROUNDUP((numConnections * connBW (in GB\/s))\/ ssdBW (R or W))
        \nNOTE: Numbers were rounded up as a partial SSD isn\u2019t possible. This also does not account for the necessary CPU required to handle all of the I\/O and assumes unlimited controller CPU power.<\/i>
        \nNetwork BWSSDs required to saturate network BW
        \nController ConnectivityAvailable Network BWRead I\/OWrite I\/O
        \nDual 4Gb FC8Gb == 1GB23
        \nDual 8Gb FC16Gb == 2GB45
        \nDual 16Gb FC32Gb == 4GB89
        \nDual 1Gb ETH2Gb == 0.25GB11
        \nDual 10Gb ETH20Gb == 2.5GB56
        \nAs the table shows, if you wanted to leverage the theoretical maximum performance an SSD could offer, the network can become a bottleneck with anywhere from 1 to 9 SSDs depending on the type of networking leveraged","quoteUsername":"virtualizecr","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
    r
    Userlevel 1
    徽章 +9
    感谢您的答复
    但是看来我没有问这个问题正确！！！
    Nutanix群集工作正常。现在，我从同一型号购买了新节点，因此我想将其添加到群集中。最好的方法是什么？我是否需要再次使用基础来添加此节点？请为我提供完成此类任务的步骤。

    问候，
    \nBut seems that I didnt asked this question proper way!!!
    \nNutanix cluster working fine. and now I purchased new node from the same model so I want to add it into the cluster.what is the best way to do this? Do I need to use the foundation again to add this node? please provide me with steps to complete such tasks if available.
    \n
    \nRegards,","quoteUsername":"rami","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
    条款和条件
    Learn more about our cookies.<\/a>","cookiepolicy.button":"Accept cookies","cookiepolicy.button.deny":"Deny all","cookiepolicy.link":"Cookie settings","cookiepolicy.modal.title":"Cookie settings","cookiepolicy.modal.content":"We use 3 different kinds of cookies. You can choose which cookies you want to accept. We need basic cookies to make this site work, therefore these are the minimum you can select. Learn more about our cookies.<\/a>","cookiepolicy.modal.level1":"Basic
    Functional","cookiepolicy.modal.level2":"Normal
    Functional + analytics","cookiepolicy.modal.level3":"Complete
    Functional + analytics + social media + embedded videos"}}}">
    Baidu