解决了

BMC固件版本已过时 - 如何更新BMC固件？

  • 2015年11月25日
  • 1回复
  • 914视图
m
徽章 +4
大家好，

我们的Nutanix已经运行了两年多了。由于我们的工作环境的变化（以及我们的3050节点在第3.5号上开始的事实），我们决定利用机会执行现场安装，并升级到第4.5号。
我们有一段时间的BMC错误（因为我们在NOS 4.X上）。
重新出现的程序表现出色，但是我确信在重新成像期间，BMC固件应该进行更新，事实并非如此。BMC固件仍然是1.87版。NCC向我们发出警告。我搜索了该网站，但是找不到BMC固件文件。
我是否需要从Supermicro网站上获取它们（如果这样做的方式不喜欢），或者是否有Nutanix链接到最近的BMC固件？一些朝正确方向的指针将不胜感激

非常感谢
亲切的问候
马里诺
图标

最好的答案马里诺2015年11月25日，15:52

\nProblem solved :)
\n(KB 1724 helped, a lot 🙂 )","className":"post__content__best_answer"}">
查看原件
    \n
    \nOur nutanix has been running for a little bit more than 2 years now. Due to changes in our work environment (and the fact that our 3050 nodes started on NOS 3.5) we decided to use the opportunity to perform a field install, and do the upgrade to nos 4.5.
    \nWe were getting the BMC error for a little while (since we were on nos 4.x).
    \nThe reimage proces went perfectly but, and I was sure that during the reimage the BMC firmware should have been update, this was not the case. BMC firmware is still version 1.87. NCC is giving us warnings about that. I searched the site, but I can't find the BMC firmware files.
    \nDo I need to go get them from the supermicro site (not fond if doing things that way), or is there a nutanix link to the most recent BMC firmware? Some pointers in the right direction would be appreciated
    \n
    \nThank you very much
    \nkind regards
    \nMarino","quoteUsername":"Marino","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">

    1回复

    m
    徽章 +4
    发布文章后，所有作品掉在一起
    问题解决了 ：）
    (KB 1724 helped, a lot )
    \nProblem solved :)
    \n(KB 1724 helped, a lot 🙂 )","quoteUsername":"Marino","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">

    回复


    Baidu