问题

致命的成像线程“ SVM”因理性[无]而失败

  • 2020年11月16日
  • 15个答复
  • 1466次观点
Carlosomn

大家好，

我正在尝试使用最新的固件在HPE DL360 Gen 9上安装Nutanix社区版。

这是配置：

256GB RAM
HPE以太网1GB 4-port 331i适配器
智能HBA H240与：

  • 3x 1TB RAID 0用于数据磁盘的SSD
  • 1x 1TB RAID 0 SSD用于CVM启动磁盘
  • 1倍USB sandisk Ultra 3.0用于管理程序启动

几分钟后选择光盘后，我得到了此错误：

有任何想法吗？

谢谢

Hi all,<\/p>

I am trying to install Nutanix Community edition on a Hpe DL360 Gen 9\u00a0with the latest firmware.<\/p>

This is the configuration:<\/p>

256GB RAM
HPE Ethernet 1Gb 4-port 331i Adapter
Smart HBA H240 with:<\/p>

  • 3x\u00a0 1TB RAID 0 SSD for DATA DISK<\/li>\t
  • 1x 1TB RAID 0 SSD for CVM Boot Disk<\/li>\t
  • 1x USB Sandisk Ultra 3.0 for Hypervisor Boot<\/li><\/ul>

    After selecting the discs after a few minutes I get this error:<\/p>

    \"//www.jhbzcj.com/next/installation-configuration-23/\"<\/figure>

    Any ideas?<\/p>

    \u00a0<\/p>

    Thanks<\/p>","quoteUsername":"CarlosOMN","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">

15个答复

m

嗨，卡洛斯，

我的错误完全相同。您是否设法找到了修复/解决方案


谢谢

Hi Carlos,<\/p>

\u00a0<\/p>

I\u2019m getting exactly the same error. Did you manage to find a fix\/solution<\/p>


Thanks\u200b\u200b\u200b\u200b\u200b\u200b\u200b<\/p>","quoteUsername":"Mohideenyassarvm","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">

Carlosomn

嗨，Mohideenyassarvm，

我尝试了多个装置，但没有找到解决方案。似乎安装并不容易

Hi\u00a0Mohideenyassarvm,<\/p>

I have tried several installations but I have not found the solution. It seems that the installation is not so easy\u00a0<\/p>

\u00a0<\/p>","quoteUsername":"CarlosOMN","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">

m

我正在尝试将其安装在4个节点服务器中。我能够成功安装nutanix ce的3个节点。但是，只有一个节点给出了此错误。该节点和其他节点之间的差异是，不工作节点具有4x1TB HDD，1x400GB SSD和工作节点具有3x1TB HDD，1x400 GB HDD和1X 400GB SSD

谢谢
Mohideen

I\u2019m trying to install this in a 4 Node server. 3 Nodes i was able to install Nutanix CE successfully. However only one node is giving this error. Difference between this node and other node is that the not working node has 4x1TB HDD, 1x400GB SSD and working nodes are having 3x1TB HDD , 1x400 GB HDD and 1x 400GB SSD<\/p>

Thanks
Mohideen<\/p>

\u00a0<\/p>

\u00a0<\/p>","quoteUsername":"Mohideenyassarvm","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">

齿轮
Userlevel 1
徽章 +1

我的英特尔nuc7有相同的误差

Intel nuc 7 I5 nuc7i5bnh，Intel Core i5-7260U，带有下面的存储（BIOS为电流）

  • Sandisk-SDCZ430-016G-G46 16GB Ultra Fit USB 3.1闪存驱动器
  • 120 GB SSD驱动器
  • 关键P2 1TB 3D NAND NVME
  • 40 GB内存

英特尔核7，i7 x 3
I have the same error on my Intel NUC7<\/p>
\"//www.jhbzcj.com/next/installation-configuration-23/\"<\/figure>

\u00a0<\/p>

Intel NUC 7 i5 NUC7i5BNH, Intel Core i5-7260U with storage shown below (BIOS is current)<\/p>

  • SanDisk - SDCZ430-016G-G46 16GB Ultra Fit USB 3.1 Flash Drive<\/li>\t
  • 120 GB SSD Drive<\/li>\t
  • Crucial P2 1TB 3D NAND NVMe<\/li>\t
  • 40 GB Memory<\/li><\/ul>
    \"//www.jhbzcj.com/next/installation-configuration-23/\"<\/figure>

    \u00a0<\/p>","quoteUsername":"gearmesh","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">

齿轮
Userlevel 1
徽章 +1

为了澄清，“ 120 GB SSD驱动器”是我的SATA驱动器。

英特尔核7，i7 x 3
To clarify, the \u201c120 GB SSD Drive\u201d is my SATA drive.<\/p>

\u00a0<\/p>","quoteUsername":"gearmesh","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">

m
徽章 +1

我遇到了完全相同的问题。任何想法如何解决这一问题？

I am having exactly the same issue. Any ideas how to fix this?<\/p>","quoteUsername":"matt_infraConsulting","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
m
徽章 +1

对我来说，事实证明这是RAID控制器的问题。我使用了默认的PERC H710，该PERC不起作用。将其交换为LSI 2008 / 9211-8i使它有所不同。

For me it turns out it was an issue witht the RAID controller. I used the default PERC H710, which did not work. Swapping it for an LSI 2008 \/ 9211-8i made the difference.<\/p>","quoteUsername":"matt_infraConsulting","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
k

戴尔R230有同样的问题

突袭5上的4x 8TB

2x SSD 250GB

在60/2430中总是有这个错误

有什么想法如何解决这个问题？在其他服务器中安装没有任何问题

Have this same issues with Dell R230\u00a0<\/p>

4x 8TB on raid 5\u00a0<\/p>

2x SSD 250GB\u00a0<\/p>

in 60\/2430 have always this error\u00a0<\/p>

Any idea how to fix this ? IN other server install no have any problem\u00a0<\/p>","quoteUsername":"kitsune242","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">

术

你好。我有同样的问题。

有什么想法可以解决吗？

术
Hello. I have the same issue.\u00a0<\/p>

Any ideas to fix it?<\/p>","quoteUsername":"Tural","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">

j

我在戴尔C6220II的四个节点之一上也遇到了同样的问题。安装程序选择 /dev /sdc作为CVM磁盘和 /dev /sdd作为AHV磁盘。我希望AHV磁盘为 /dev /sdc和CVM磁盘为 /dev /sdd，但是每次我在安装过程中尝试修改时，都会在2430分中的420或450左右发生此特定错误。当我接受安装程序的默认选择时，它完成了错误错误。我成功地测试了这两个SSD-两者都是完美运行的，因此不是磁盘问题。很奇怪...

I had this same problem on one of the 4 nodes in a Dell C6220II. The installer selected \/dev\/sdc as the CVM disk and \/dev\/sdd as the AHV disk. I wanted the AHV disk to be \/dev\/sdc and the CVM disk to be \/dev\/sdd, but every time I tried to modify during the install process, it would result in this particular error at around 420 or 450 out of 2430. When I accepted the default selection from the installer, it completed w\/o error. I tested both SSDs successfully - both were perfectly operational, so not a disk problem. Very weird...<\/p>","quoteUsername":"jrehmert","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
v

我在戴尔R730上安装CE-2020.09.16也遇到了同样的问题。

在我使用BIOS之前。但是，当我切换到EFI时，安装了3个节点，没有任何问题。

I had the same problem with installation ce-2020.09.16 on the Dell R730.<\/p>

Before I was using the BIOS. But when I switched to EFI - 3 nodes were installed without any problems.<\/p>","quoteUsername":"VanG","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">

v

我也有同样的问题。

有解决方案吗？

I have the same problem.<\/p>

Any solution?<\/p>","quoteUsername":"victorfz","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">

r

嗨，大家好，

我为这个问题找到了一个快速而肮脏的解决方法。

在成像的运行时，看来CVM分区的分区标记似乎缺少。

我已将SVM.PY的第603行更改为Self.boot_part变量，并将CVM启动分区“ SDB1”的值分配为find_nutanix_partition的呼叫。

请尝试此操作，并报告您的失败成功。

问候，

罗马

Hi Guys,<\/p>

I found a quick and dirty workaround for this issue.<\/p>

It\u00a0looks like the partition marker for the CVM partition is missing at the runtime of the imaging.<\/p>

\u00a0<\/p>

I\u2019ve changed the line 603 of the svm.py and assign a value of my CVM boot partition \u2018sdb1\u2019 to the\u00a0self.boot_part variable to avoid the call of find_nutanix_partition.<\/p>

\"//www.jhbzcj.com/next/installation-configuration-23/\"<\/figure>

Please try this one and report your success of fail.<\/p>

Regards,<\/p>

Roman<\/p>","quoteUsername":"RomanAusl\u00e4nder","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">

A

嗨，大家好。

今天，我面临着同样的问题。

我使用如下所示的设备：

  • HPE DL360 GEN8
  • HDD 450GB×2
  • SSD 320GB×1

还有一个为Nutanix Comity Edition格式化的USB。

然后，首先，安装显示出来。

然后，安装最终以失败的原因，每个人都提到“致命成像线程'SVM'因理性[无]而失败”

第二次试验

我又添加了一个硬盘，然后尝试再次安装。

显示如下；字母“我”新出现，您无法使用键盘输入。您可以使用“ H”，“ C”和“ D” Tho这样做。

所有字母都是自动设置的，我什么也没做。

最后安装完成了。

请尝试此技巧，希望这可以帮助您解决问题！！

Hi guys.<\/p>

\u00a0<\/p>

Today, I got faced into same problem.<\/p>

\u00a0<\/p>

devices I used as following below:<\/p>

  • HPE DL360 Gen8<\/li>\t
  • HDD\u00a0450GB\u00a0 \u00d7\u30002\u00a0<\/li>\t
  • SSD\u00a0 320GB\u00a0 \u00d7\u00a0 \u00a0 1<\/li><\/ul>

    and one USB that formatted for Nutanix Comity Edition.<\/p>

    \u00a0<\/p>

    Then at first, the install display comes up like this;<\/p>

    \"//www.jhbzcj.com/next/installation-configuration-23/\"<\/figure>

    \u00a0<\/p>

    then installation ended up with failure reason with as everyone mention \u201cFATAL Imaging thread 'svm' failed with reason [none]\u201d\u00a0<\/p>

    \"//www.jhbzcj.com/next/installation-configuration-23/\"<\/figure>

    \u00a0<\/p>

    2nd trial<\/p>

    I added one more HDD and then tried installing again.<\/p>

    Display was like below; letter \u201cI\u201d newly showed up, which you can\u2019t type in with your keyboard.\u00a0 You can do so with \u201ch\u201d, \u201cc\u201d and \u201cd\u201d tho.<\/p>

    All letters were automatically set and I did nothing with those.<\/p>

    \"//www.jhbzcj.com/next/installation-configuration-23/\"<\/figure>

    \u00a0<\/p>

    \"//www.jhbzcj.com/next/installation-configuration-23/\"<\/figure>

    finally\u00a0installation got done.<\/p>

    please try this tip and hope this helps you solve the problem!!<\/p>

    \u00a0<\/p>

    \u00a0<\/p>

    \u00a0<\/p>

    \u00a0<\/p>","quoteUsername":"Ayakyta","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">

j

我又添加了一个硬盘，然后尝试再次安装。

显示如下；字母“我”新出现，您无法使用键盘输入。您可以使用“ H”，“ C”和“ D” Tho这样做。

所有字母都是自动设置的，我什么也没做。

最后安装完成了。

请尝试此技巧，希望这可以帮助您解决问题！！

欢呼Ayakyta，几次失败后，我又添加了另一个硬盘驱动器，它可以享用！感谢分享。

\t

\u00a0<\/p>\t

I added one more HDD and then tried installing again.<\/p>\t

Display was like below; letter \u201cI\u201d newly showed up, which you can\u2019t type in with your keyboard.\u00a0 You can do so with \u201ch\u201d, \u201cc\u201d and \u201cd\u201d tho.<\/p>\t

All letters were automatically set and I did nothing with those.<\/p>\t

\"//www.jhbzcj.com/next/installation-configuration-23/\"<\/figure>

\u00a0<\/p>\t

\"//www.jhbzcj.com/next/installation-configuration-23/\"<\/figure>

finally\u00a0installation got done.<\/p>\t

please try this tip and hope this helps you solve the problem!!<\/p>\t

\u00a0<\/p>\t

\u00a0<\/p>\t

\u00a0<\/p>\t

\u00a0<\/p>\t<\/div><\/content-quote>

Cheers Ayakyta, after failing several times I added another hard drive and it worked a treat!\u00a0 Thanks for sharing.<\/p>

\u00a0<\/p>","quoteUsername":"JohnIsh","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">

回复


条款和条件
Learn more about our cookies.<\/a>","cookiepolicy.button":"Accept cookies","cookiepolicy.button.deny":"Deny all","cookiepolicy.link":"Cookie settings","cookiepolicy.modal.title":"Cookie settings","cookiepolicy.modal.content":"We use 3 different kinds of cookies. You can choose which cookies you want to accept. We need basic cookies to make this site work, therefore these are the minimum you can select. Learn more about our cookies.<\/a>","cookiepolicy.modal.level1":"Basic
Functional","cookiepolicy.modal.level2":"Normal
Functional + analytics","cookiepolicy.modal.level3":"Complete
Functional + analytics + social media + embedded videos"}}}">
Baidu