This week on the podcast, Dwayne chats with Marc Trouard-Riolle, about Nutanix Cloud Clusters (NC2) on Azure and how to get started. Nutanix Cloud Clusters (NC2) on Microsoft Azure enables your applications to be run where you want them, on-premises or in the public cloud, all operated as a single cloud.<\/p>

<\/oembed><\/p>

解决了

基础3.0.1成像戴尔集群以2％的速度失败。没有ISO安装（移至正确的论坛）

一个
徽章 +4
你好
我正在使用Foundation 3.0.1来对Dell R730的3个节点群集进行映像，但是它在2％的进度下对StandardError：Mount失败：NFS路径不在'RemoteImage -S'中
该系统可以访问和配置Dell IDRAC IPMI接口无问题，并且在每个服务器上启用了虚拟CD。
似乎无法根据日志安装所需的ISO。提到的路径中没有ISO文件。
以下是日志的相关部分。
使用nutanix_installer_package-danube-4.1.5.1-0771.tar和esxi 6.0.0 ISO Image。

任何帮助将不胜感激。
安德鲁


20151118 072259: /opt/dell/srvadmin/sbin/racadm -r 10.50.177.73 -u root -p calvin remoteimage -c -l 10.50.177.203:/home/nutanix/foundation/tmp/phoenix_node_isos/foundation.node_1.iso -U Nutanix -P Nutanix/4U20151118 072302：/opt/opt/dell/srvadmin/srvadmin/sbin/racadm -R 10.50.177.73 -U root -p calvin remote -imimage -S20151118 072305：安全警报：安全警报：证书是无效的 - 无效 - 自我签名证书证书。使用-s for racAdm停止在证书相关错误上执行。远程文件共享是disabledusername密码sharename20151118 072305：rfs of/home/nutanix/foundation/tmp/phoenix_node_isos/foundation.node_1.iso失败。尝试从20151118 072305安装此路径：确保正确配置NFS的其他机器。
图标

最好的答案安德鲁布2015年11月23日，16:22

\n
\nThanks again for your input and also for the node recovery process which may be useful to me in future.
\nRegards,
\nAndrew","className":"post__content__best_answer"}">
查看原件
\nI am using foundation 3.0.1 to image a 3 node cluster of Dell R730's however it fails at 2% progress for StandardError: Mount failed: NFS path not in 'remoteimage -s'
\nThe system can access and configure the Dell iDRAC IPMI interface no problem and the virtual cd is enabled on each server.
\nIt appears to not be able to mount the required ISO according to the logs. There is no ISO file in the path mentioned.<\/i>
\nBelow is the relevant section of the log.
\nUsing nutanix_installer_package-danube-4.1.5.1-0771.tar and ESXi 6.0.0 iso image.
\n
\nAny help would be greatly appreciated.
\nAndrew
\n
\n
\n20151118 072259: \/opt\/dell\/srvadmin\/sbin\/racadm -r 10.50.177.73 -u root -p calvin remoteimage -c -l 10.50.177.203:\/home\/nutanix\/foundation\/tmp\/phoenix_node_isos\/foundation.node_1.iso -u nutanix -p nutanix\/4u20151118 072302: \/opt\/dell\/srvadmin\/sbin\/racadm -r 10.50.177.73 -u root -p calvin remoteimage -s20151118 072305: Security Alert: Certificate is invalid - self signed certificateContinuing execution. Use -S option for racadm to stop execution on certificate-related errors. Remote File Share is DisabledUserName Password ShareName20151118 072305: RFS mount of \/home\/nutanix\/foundation\/tmp\/phoenix_node_isos\/foundation.node_1.iso failed.<\/i> <\/b>Try to mount this path from20151118 072305: a different machine to make sure NFS is configured correctly.","quoteUsername":"AndrewB","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
该主题已关闭以供评论

3个答复

乔恩
秩
UserLevel 6
徽章 +29
嗨

由于这是“付费的nutanix”，请打开戴尔支持的门票，并让他们升级为Nutanix，我们可以帮助您解决您所经历的基础问题，并给您更快的响应。

也就是说，从技术上讲，戴尔集群不支持基础，因为它们有自己的成像过程。我知道它确实有效，因为我的团队做了很多次，只知道这不是常态，因为戴尔可以从工厂全部运送ESX，HV和AHV。

我很好奇，您为什么要为这个集群建立？
乔恩·科勒|Nutanix工程技术总监|Nutanix NPX＃003，VCDX＃116 |@jonkohler |如果有用的话，请荣誉！
\n
\nSince this is \"paid nutanix\", Please open a ticket with Dell support, and have them escalate to Nutanix, we can help you power through the foundation issues you're experiencing and give you a more rapid response.
\n
\nThat said, technically, Foundation isn't supported for Dell clusters, as they have their own imaging process. I know for a fact it does work, as my team as done it plenty of times, just know it's not the norm, since Dell can ship ESX, HV, and AHV from the factory all native.
\n
\nI'm curious, Why are you trying to foundation this cluster?","quoteUsername":"Jon","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
r
秩
徽章 +4
嗨

正如乔恩（Jon）提到的那样 - 请让我们知道重新成像节点的原因 - XC设备实际上具有称为Rapid System Recovery的功能；这使您可以将XC设备还原为其工厂配置 - 它是用 + CVM发货的管理程序。

解决方案：

通过登录IDRAC并查看硬件日志和任何警报，验证这不是硬件问题。将服务器重新启动到SDCARD。通过RASR出厂重置运行，将XC放置在功能状态中。当服务器启动按下F11时。出现启动菜单时，请选择“ Oneshot BIOS启动菜单”。选择“内部SD”。按1表示“工厂重置”。确认您想通过键入“是”来删除节点上的所有内容。

大约10分钟后，它将希望您确认重新启动。之后，它是完全自动的。由于没有明确的“我完成了！”消息您应该注意第一次重新启动的时间，然后完全将系统隔开45分钟
\n
\nAs Jon mentioned - Please let us know the reason for re-imaging the nodes - The XC Appliances actually have a feature called Rapid System Recovery; which allows you to restore the XC Appliances to their factory config - That being the Hypervisor that it shipped with + the CVM.
\n
\nSolution:
\n
\nVerify this is not a hardware issue by logging in to the iDRAC and reviewing hardware logs and any alerts. Reboot the server to the SDCARD. Run through the RASR Factory Reset to place the XC into a functional state.While the server is booting press F11. When the boot menu appears, pick \u201cOneshot BIOS Boot Menu\u201d. Pick \u201cInternal SD\u201d. Press 1 for \u201cFactory Reset\u201d. Confirm that you want to erase everything on the node by typing \u201cyes\u201d.
\n
\nAfter ~10 minutes it will want you to confirm a reboot. After that it is completely automatic. Since there is no clear \u201cI\u2019m done!\u201d message you should note the time of that first reboot and leave the system completely alone for 45 minutes","quoteUsername":"richardarsenian","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
一个
徽章 +4
嗨，大家好。感谢您的帮助。最终，我通过将节点设置为baremetal并手动输入IPMI MAC地址来完成此工作。我已经在网络上自动检测到无法正常工作的节点。当我从基于Hyper-V的群集切换到ESXI时，我需要重新图像，以进行某些Performnace测试。

再次感谢您的输入以及节点恢复过程，这对我将来可能对我有用。
问候，
安德鲁
\n
\nThanks again for your input and also for the node recovery process which may be useful to me in future.
\nRegards,
\nAndrew","quoteUsername":"AndrewB","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
Learn more about our cookies.<\/a>","cookiepolicy.button":"Accept cookies","cookiepolicy.button.deny":"Deny all","cookiepolicy.link":"Cookie settings","cookiepolicy.modal.title":"Cookie settings","cookiepolicy.modal.content":"We use 3 different kinds of cookies. You can choose which cookies you want to accept. We need basic cookies to make this site work, therefore these are the minimum you can select. Learn more about our cookies.<\/a>","cookiepolicy.modal.level1":"Basic
Functional","cookiepolicy.modal.level2":"Normal
Functional + analytics","cookiepolicy.modal.level3":"Complete
Functional + analytics + social media + embedded videos"}}}">
Baidu