HyperV的基础3.0问题

一个
徽章 +10
嗨，盖兹，

最近，我使用Foundation 3.0对Nutanix节点进行映像带有HyperV。但成像被卡在82％。然后使用2.粉底效果成像节点。HyperV成像在3.0.1版本中被删除


因此，如果您有任何基本版本升级到最新版本，并在使用Foundation之前先检查发行笔记

希望这会有所帮助


干杯
\n
\nrecently i used foundation 3.0 to image nutanix nodes with hyperv.but imaging got stuck at 82%.then i imaged node using 2.version of foundation.Then i came to see the 3.0.1 release note in which it is mentioned the problem with hyperv imaging is removed in 3.0.1 version
\n
\n
\nso if you have any base version upgrade to latest version and check the release note before using foundation
\n
\nhope this will help
\n
\n
\ncheers","quoteUsername":"alunkal","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">

3个答复

阿卢西亚尼
UserLevel 7
徽章 +34
感谢您的分享
在Twitter上关注我：https：//twitter.com/angeloluciani
l
徽章 +3
我使用粉底3.0.4，但仍然卡在82％上。发生什么事？您能给MU解决方案吗？谢谢
k
徽章 +9
我什至尝试在Hyper V主机中为Phoenix NOS 4.5.0.2手动安装，但它也被卡住了。
请建议。
以及为什么Foundation 3.+说明仅支持TARBALL NOS，而我们只能降低.iso格式的NOS。
需要紧急协助。
\nKindly advise please.
\nAnd why Foundation 3.+ stated only support tarball NOS while the we can only down NOS which is in .ISO format.
\nNeed assist urgently.","quoteUsername":"KYFong","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">

回复


Baidu