问题

基金会的致命错误

  • 2021年8月30日
  • 10个回答
  • 209的浏览量
B
徽章 ＋1

你好朋友

你好吗?目前，我试图建立一个Nutanix 3节点环境，但在基础进程开始后，它会在“等待安装程序启动”阶段与“致命”错误警告，我不知道是什么造成的错误，谁能告诉我一些东西。

我附上了错误和过程的截图。

Hello Friends<\/p>

How are you? Currently i am trying to foundation A Nutanix 3 node environment but after the foundation process begins it will halt at \u201cwaiting for the installer to boot\u201d stage with \u201cfatal\u201d error warning i don\u2019t know what is causing the error can anyone tell me something.<\/p>

I have attached screenshots of errors and process.<\/p>

\"//www.jhbzcj.com/next/installation-configuration-23/\"<\/figure>
\"//www.jhbzcj.com/next/installation-configuration-23/\"<\/figure>
\"//www.jhbzcj.com/next/installation-configuration-23/\"<\/figure>
\"//www.jhbzcj.com/next/installation-configuration-23/\"<\/figure>

\u00a0<\/p>","quoteUsername":"bereketsolomon","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">

10个回答

迈克尔。勒•
排名
Userlevel 2
徽章 ＋４

嗨. .请确保您可以通过IPMI接口访问每个节点。通过IPMI(192.168.0.130)访问192.168.0.150节点似乎有一个问题。我将首先确保所有物理连接都是正确的，并且在所有以太网端口上都有链接灯，然后尝试从基础VM ping这些端口。

Hi..\u00a0 Can you please ensure you can access each node via the IPMI interface.\u00a0 It looks like there might be an issue accessing the 192.168.0.150 node via IPMI (192.168.0.130).\u00a0 I would start by ensuring all the physical connectivity is correct and you have link lights on all the ethernet ports and then trying pinging\u00a0 them all from the foundation VM.\u00a0\u00a0<\/p>","quoteUsername":"Michael.Manuele","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
H
排名
徽章 ＋３

你好 @bereketsolomon确保基础VM能够连接到IPMI接口。如Michael所说，请检查物理连接。关闭基础虚拟机的防火墙，并确保使用节点上的10G端口。在出现类似错误的几个案例中，问题与VLAN集群和端口有关。IPMI和foundation VM之间需要开放80443和623端口。

Hello @bereketsolomon<\/user-mention>\u00a0Make sure foundation VM can reach the IPMI interface. As Michael mentioned, please check physical connectivity. Turn off the firewall on foundation VM and make sure you use 10G ports on the node. In a couple of cases with similar error, the issue was with VLAN trunking and ports.\u00a0\u00a0Port 80,443 and 623 should be open between IPMI and foundation VM.\u00a0<\/p>","quoteUsername":"Haritha Andal","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
B
徽章 ＋1

嗨. .请确保您可以通过IPMI接口访问每个节点。通过IPMI(192.168.0.130)访问192.168.0.150节点似乎有一个问题。我将首先确保所有物理连接都是正确的，并且在所有以太网端口上都有链接灯，然后尝试从基础VM ping这些端口。

是，可以访问IPMI接口。

\t

Hi..\u00a0 Can you please ensure you can access each node via the IPMI interface.\u00a0 It looks like there might be an issue accessing the 192.168.0.150 node via IPMI (192.168.0.130).\u00a0 I would start by ensuring all the physical connectivity is correct and you have link lights on all the ethernet ports and then trying pinging\u00a0 them all from the foundation VM.\u00a0\u00a0<\/p>\t<\/div><\/content-quote>

yes i can access the IPMI interfaces.<\/p>","quoteUsername":"bereketsolomon","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">

B
徽章 ＋1

你好 @bereketsolomon确保基础VM能够连接到IPMI接口。如Michael所说，请检查物理连接。关闭基础虚拟机的防火墙，并确保使用节点上的10G端口。在出现类似错误的几个案例中，问题与VLAN集群和端口有关。IPMI和foundation VM之间需要开放80443和623端口。

是的，端口是开放的，我猜可能是凤凰ISO崩溃了?

\t

Hello\u00a0@bereketsolomon<\/user-mention>\u00a0Make sure foundation VM can reach the IPMI interface. As Michael mentioned, please check physical connectivity. Turn off the firewall on foundation VM and make sure you use 10G ports on the node. In a couple of cases with similar error, the issue was with VLAN trunking and ports.\u00a0\u00a0Port 80,443 and 623 should be open between IPMI and foundation VM.\u00a0<\/p>\t<\/div><\/content-quote>

yes the ports are open and still the same am guessing may be the phoenix ISO has crashed?<\/p>","quoteUsername":"bereketsolomon","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">

N

它试图通过10g上行网络联系但无法联系到。请检查交换机端口是否开启，是否配置了VLAN trunk。

It\u2019s trying to reach out on 10Gig uplink network not reachable. Please check switch ports are enabled and VLAN trunk configured.<\/p>","quoteUsername":"NutanixSarath","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
C

我也犯了同样的错误。我们用的是我们自己的开关。

我们知道问题出在哪里了吗?

谢谢!

I am having the exact same error. And we are using our own switch.<\/p>

Do we know what was the problem?<\/p>

Thanks!<\/p>","quoteUsername":"Carlos de Ram\u00f3n","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">

B
徽章 ＋1

我也犯了同样的错误。我们用的是我们自己的开关。

我们知道问题出在哪里了吗?

谢谢!

是的，在我的情况下，凤凰已经崩溃，所以尝试手动安装凤凰，然后通过登录CVM的Putty创建集群

\t

I am having the exact same error. And we are using our own switch.<\/p>\t

Do we know what was the problem?<\/p>\t

Thanks!<\/p>\t<\/div><\/content-quote>

yes in my case the phoenix was crashed so try to install the phoenix manually then create the cluster from Putty by logging in on the CVM\u00a0<\/p>","quoteUsername":"bereketsolomon","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">

N

当通过CVM推送ISO镜像时，IP地址不可达，整个安装会失败。请检查交换机端口配置、IPMI接口以及主机到交换机端口的上行链路是否连通。

While pushing the ISO image through CVM IP\u00a0address are not reachable the whole installation will be failed. Please check switch port configuration,\u00a0IPMI interface and\u00a0uplink connectivity from host to switch port.\u00a0<\/p>","quoteUsername":"NutanixSarath","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
JeroenTielen
Userlevel 1
徽章 ＋２

首先，禁用foundation运行的机器上的防火墙。

First things first, disable the firewall on the machine where foundation is running.<\/p>","quoteUsername":"JeroenTielen","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
JeroenTielen
Userlevel 1
徽章 ＋２

我再给你一些附带的信息。

它看起来像基础机器可以与你的IPMI对话，你可以在这张截图中看到:

但是你们的基金会机器从来没有收到凤凰的反馈，说它已经启动了。在此阶段，我通常会向节点打开一个额外的控制台会话，以查看实际状态。可能是被启动到凤凰城，但不能与基金会交谈。这与基础机器上的防火墙有关。

OKe a bit more side information.\u00a0<\/p>

It looks like the foundation machine can talk to your IPMI as you can see on this screenshot:\u00a0<\/p>

\"//www.jhbzcj.com/next/installation-configuration-23/\"<\/figure>

But your foundation machines never received the talk back from phoenix that it\u00a0is booted. What I normally do during this stage is open an extra console session to the node to see the actual status. Probably it is booted into phoenix but can't talk to foundation. And this has to do with your firewall on the foundation machine.\u00a0<\/p>","quoteUsername":"JeroenTielen","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">

回复


Baidu