解决了

AHV升级到5.19及以上时的虚拟交换机

Userlevel 1

＋２

嗨,所有

按照链接,

AHV升级到5.19及以上后，将OVS的br0替换为vs0，

如果br1或br2可以共存或需要手动迁移，

有人有经验吗。

谢谢你！

图标

最佳答案UPX2021年9月16日19:38

Hi Wei Cheng,<\/p>

from 5.19 onwards you have 2 choices to manage the network.<\/p>

The first is to manage that via Prism GUI under network configuration.<\/p>

The second via CLI with new commands.<\/p>

BUT, when you do the upgrade to 5.19 or a foundation with the same version you have to configure the network via GUI because this takes\u00a0precedence over\u00a0the CLI configuration with the old commands.
I guess here you can find some useful info about this and also about some new CLI commands using acli.
https:\/\/portal.nutanix.com\/page\/documents\/details?targetId=Web-Console-Guide-Prism-v5_19:wc-network-management-wc-c.html<\/a><\/p>

Userlevel 2

＋４

你好,魏,

从5.19开始，你有2种选择来管理网络。

首先是在网络配置下通过Prism GUI进行管理。

第二个是通过CLI的新命令。

但是，当您升级到5.19或使用相同版本的基础时，您必须通过GUI配置网络，因为这比使用旧命令的CLI配置优先。
我猜在这里你可以找到一些有用的信息，以及一些使用acli的CLI命令。
https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v5_19:wc-network-management-wc-c.html

希望这个有帮助。

准备是做好工作的起点!

Hi Wei Cheng,<\/p>

from 5.19 onwards you have 2 choices to manage the network.<\/p>

The first is to manage that via Prism GUI under network configuration.<\/p>

The second via CLI with new commands.<\/p>

BUT, when you do the upgrade to 5.19 or a foundation with the same version you have to configure the network via GUI because this takes\u00a0precedence over\u00a0the CLI configuration with the old commands.
I guess here you can find some useful info about this and also about some new CLI commands using acli.
https:\/\/portal.nutanix.com\/page\/documents\/details?targetId=Web-Console-Guide-Prism-v5_19:wc-network-management-wc-c.html<\/a><\/p>

报名