VMware ESXI安装媒体：驱动程序汇总ISO？

  • 2014年5月7日
  • 9回复
  • 2796意见
jpiscaer
UserLevel 2
徽章 +11
使用驾驶员汇总ISO VMware已发布的官方立场是什么？如果ESXI版本符合Nutanix批准的版本兼容性列表，可以使用它们吗？
- Cheers，JOEP Piscaerit基础架构架构架构识别设计专家＃101VMware vexpert 2009，2011，2011，2010＆2013 please访问我的博客：http：//www.virtuallifestyle.nltwiter.nltwitter：http：http：///wwwwwwwww.titter.com.com.com.pisccisceces./jpisce.jpisce.htpiin：/www.linkedin.com/in/jpiscaer
    该主题已关闭以供评论

    9回复

    dlink7
    UserLevel 4
    徽章 +19
    30天内的更新，主要发布90天。如果您需要驱动程序更新，我会记录一张票。实际上，除非有支持，否则我永远不会触摸它们。所有性能指标均通过版本控制。
    珀金萨
    秩
    Userlevel 1
    徽章 +9
    jpiscaer，

    当前，Nutanix不支持使用驱动程序汇总ISO作为管理程序安装媒体。

    ESXI的当前Nutanix支持版本的安装介质如下。
    请与您的帐户团队联系，以获取有关Nutanix群集初始设置的任何其他问题。

    ESXI 5.0U2
    ESXI 5.0U3
    ESXI 5.1U1
    ESXI 5.5GA

    注意：安装后请更新ESXI补丁和驱动程序。


    VMware驱动程序汇总ISO只能用作安装媒体。VMware的发布指出指出，他们不支持使用此媒体尝试升级ESXI主机。


    https://www.vmware.com/support/vsphere5/doc/vsphere-esxi-55-55-driver-rollup1-roole-notes.html

    “此版本的安装笔记
    重要的：ESXI 5.5.0驱动程序汇总1专为ESXI主机的新安装而设计。VMware不支持使用ESXI 5.5.0驱动程序汇总1来升级现有的ESXI安装。”


    干杯，
    亚瑟·珀金斯
    Nutanix SRE
    \n
    \nCurrently Nutanix does not support using the Driver Rollup ISO as the hypervisor installation media.
    \n
    \nThe current Nutanix supported versions of installation media for ESXi are as follows.
    \nPlease contact your account team for any additional questions regarding the initial setup of a Nutanix Cluster.
    \n
    \nESXi 5.0U2<\/b>
    \nESXi 5.0U3<\/b>
    \nESXi 5.1U1<\/b>
    \nESXi 5.5GA<\/b>
    \n <\/b>
    \nNote: Please update ESXi patches and drivers after installation.<\/b>
    \n
    \n
    \nThe VMware Driver Rollup ISO can only be used as installation media. VMware's release notes state that they do not support using this media to attempt an upgrade of an ESXi host.
    \n
    \n
    \nhttps:\/\/www.vmware.com\/support\/vsphere5\/doc\/vsphere-esxi-55-driver-rollup1-release-notes.html
    \n
    \n\"Installation Notes for This Release
    \nImportant: <\/b>The ESXi 5.5.0 Driver Rollup 1 is designed for fresh installations of ESXi hosts. VMware does not support using the ESXi 5.5.0 Driver Rollup 1 to upgrade an existing ESXi installation.\"
    \n
    \n
    \nCheers,
    \nArthur Perkins
    \nNutanix SRE","quoteUsername":"perkinsa","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
    jpiscaer
    UserLevel 2
    徽章 +11
    嗨，亚瑟，

    感谢您的回复。

    但是我觉得您的答复很模棱两可：
    1.您说不支持驾驶员汇总ISO
    2.您还说“安装后用补丁和驱动程序更新ESXI”

    不会。2导致（或多或少）与否。1我安装了带有最新驱动程序补丁的ESXI主持人？

    附带说明，我了解使用驱动程序Rollup ISO的安装与升级参数，但是升级不是我在说的。这是一个新鲜的集群安装。
    - Cheers，JOEP Piscaerit基础架构架构架构识别设计专家＃101VMware vexpert 2009，2011，2011，2010＆2013 please访问我的博客：http：//www.virtuallifestyle.nltwiter.nltwitter：http：http：///wwwwwwwww.titter.com.com.com.pisccisceces./jpisce.jpisce.htpiin：/www.linkedin.com/in/jpiscaer
    \n
    \nThanks for your reply.
    \n
    \nI feel however that your reply is ambigious:
    \n1. You say the Driver Rollup ISO is not supported
    \n2. You also say 'update ESXi with patches and drivers after installation'
    \n
    \nWouldn't no. 2 result in (more or less) the same situation as no. 1 where I have an ESXi-host installed with the most recent drivers patches?
    \n
    \nAs a side note, I understand the install vs. upgrade argument with the Driver Rollup ISO, but an upgrade is not what I'm talking about; it's a fresh cluster install.","quoteUsername":"jpiscaer","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
    珀金萨
    秩
    Userlevel 1
    徽章 +9
    我的意图不是模棱两可。


    驾驶员汇总ISO目前不受Nutanix的支持。


    即使支持驾驶员汇总ISO，仍然建议在可用时更新补丁和驱动程序。IE。ESXI Heartbleed Patch。
    \n
    \n
    \nThe Driver Rollup ISO is currently not supported by Nutanix.
    \n
    \n
    \nEven if the Driver Rollup ISO was supported, it would still be recommended to update patches and drivers as they become available. I.E. ESXi HeartBleed patch.","quoteUsername":"perkinsa","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
    jpiscaer
    UserLevel 2
    徽章 +11
    我仍然不清楚:-)

    因此，不支持使用驱动程序汇总ISO（例如驱动程序A，B和C），但是支持使用Vanilla Install ISO（不包含驱动程序A，B和C）并安装驱动程序得到支持。A，B和C手动？

    同样，我相信最终结果将是相同的。
    - Cheers，JOEP Piscaerit基础架构架构架构识别设计专家＃101VMware vexpert 2009，2011，2011，2010＆2013 please访问我的博客：http：//www.virtuallifestyle.nltwiter.nltwitter：http：http：///wwwwwwwww.titter.com.com.com.pisccisceces./jpisce.jpisce.htpiin：/www.linkedin.com/in/jpiscaer
    \n
    \nSo it's not supported to use the Driver Rollup ISO (which contains, say, driver A, B and C), but it is supported to use the vanilla install ISO (which doesn't contain driver A, B and C) and install driver A, B and C manually?
    \n
    \nAgain, the end result would be identical, I believe.","quoteUsername":"jpiscaer","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
    Shuguet
    UserLevel 4
    徽章 +20
    当Nutanix使用Nutanix支持的安装媒体（仅此）进行修补时，Nutanix在安装媒体中添加了振动，当一切工作对我来说都是非常有意义的。

    Nutanix节点不是“您安装VM的Vsphere管理程序”，而是一块完整的操纵程序 + CVM + CVM +所有需要工作所需的零件。

    我想说的是，您不应该自己安装虚拟机管理程序，然后尝试将Nutanix CVM安装在顶部。只需使用Nutanix安装过程，该步骤将在一次倒下中安装所有所需的零件（操纵管理程序，驱动程序，Pynfs和其他氛围），然后使用VMware补丁升级。

    由于Nutanix提供的内容除了没有支持的硬件，因此我相信Nutanix将提供新的硬件驱动程序，因为它们可用并已由其QA团队进行了测试。

    西尔万。
    Sylvain Huguet -2X Nutanix技术冠军2015-2016，法国Nutanix Connect Chapter Champion，法国VMUG首领，6倍VMware Vexpert 2011至2016
    \n
    \nA Nutanix node is not \"a vSphere hypervisor on top of which you install a VM\" it's a full bundle of hypervisor + CVM + all the bits and pieces needed for this to work.
    \n
    \nWhat I'm trying to say is that you should not try to install the hypervisor yourself then attempt to install the Nutanix CVM on top. Just use Nutanix installation procedure that will install all the needed pieces (Hypervisor, drivers, pyNFS & other VIBs) in one fell swoop, then upgrade with VMware patchs if they are supported.
    \n
    \nAs there is no supported hardware other than what Nutanix offers, I belive Nutanix will provide new hardware drivers as they become available & have been tested by their QA team.
    \n
    \nSylvain.","quoteUsername":"shuguet","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
    jpiscaer
    UserLevel 2
    徽章 +11
    我知道您需要遵循Phoenix或Foundation的确切安装过程，该过程添加了所有特定的Nutanix-Features（例如ESXI配置，多个振动，其他驱动程序等），但我认为，ESXI安装媒体只是那是一种香草安装ISO。
    从问答的角度来看，我得到Nutanix只能支持经过特定测试和尝试的安装媒体。

    Sylvain的补充是，Nutanix不需要或不对驾驶员滚动ISO中的所有（不需要的）驱动程序进行测试，并且将由Nutanix测试，支持和释放任何所需的其他驱动程序。
    从这个角度来看，驱动程序设置在汇总ISO和Nutanix发布的驱动程序中实际上会有所不同，这就是为什么不支持驾驶员滚动ISO的原因：安装使用香草安装ISO的最终结果，并使用nutanix支持的更新Nutanix释放的驾驶员组与安装驾驶员滚动ISO的实质性不同。
    - Cheers，JOEP Piscaerit基础架构架构架构识别设计专家＃101VMware vexpert 2009，2011，2011，2010＆2013 please访问我的博客：http：//www.virtuallifestyle.nltwiter.nltwitter：http：http：///wwwwwwwww.titter.com.com.com.pisccisceces./jpisce.jpisce.htpiin：/www.linkedin.com/in/jpiscaer
    \nFrom a Q&A perspective, I get that Nutanix will only support specific tested and tried installation media.
    \n
    \nThe addition Sylvain makes is that Nutanix won't need or won't test against all the (unneeded) drivers in the Driver Rollup ISO, and that any required additional drivers will be tested, supported and released by Nutanix.
    \nWith that perspective, the driver set in the Rollup ISO and the driver set released by Nutanix will actually differ, which is why the Driver Rollup ISO is not supported: the end result of installing with a vanilla installation ISO and update with the Nutanix-supported and Nutanix-released driver set will differ materially from installing with the Driver Rollup ISO.","quoteUsername":"jpiscaer","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
    jpiscaer
    UserLevel 2
    徽章 +11
    由于我还没有运行生产，因此我决定使用Phoenix使用香草安装ISO重新安装所有节点。除了“清洁安装管理程序”选项外，我是否还需要选择“修复SVM（现有数据保留”选项？
    - Cheers，JOEP Piscaerit基础架构架构架构识别设计专家＃101VMware vexpert 2009，2011，2011，2010＆2013 please访问我的博客：http：//www.virtuallifestyle.nltwiter.nltwitter：http：http：///wwwwwwwww.titter.com.com.com.pisccisceces./jpisce.jpisce.htpiin：/www.linkedin.com/in/jpiscaer
    Shuguet
    UserLevel 4
    徽章 +20
    我不这么认为。据我所知，该选项启动的脚本是可以用来重新创建第一个SSD上的分区并重新创建CVM内部结构/数据的脚本。如果您的CVM都很好。在您开始重新安装所有内容之前，很可能仍然很可能。我认为此选项是针对您丢失节点的第一个SSD或以其他方式与CVM混乱的情况的目标，以至于无法使用。是根据我可以看到/阅读脚本的观点。如有疑问，需要正式答案，请在一个案例中询问Nutanix ：） Sylvain。
    Sylvain Huguet -2X Nutanix技术冠军2015-2016，法国Nutanix Connect Chapter Champion，法国VMUG首领，6倍VMware Vexpert 2011至2016
    Learn more about our cookies.<\/a>","cookiepolicy.button":"Accept cookies","cookiepolicy.button.deny":"Deny all","cookiepolicy.link":"Cookie settings","cookiepolicy.modal.title":"Cookie settings","cookiepolicy.modal.content":"We use 3 different kinds of cookies. You can choose which cookies you want to accept. We need basic cookies to make this site work, therefore these are the minimum you can select. Learn more about our cookies.<\/a>","cookiepolicy.modal.level1":"Basic
    Functional","cookiepolicy.modal.level2":"Normal
    Functional + analytics","cookiepolicy.modal.level3":"Complete
    Functional + analytics + social media + embedded videos"}}}">
    Baidu