问题

移动Windows机器时的SCSI驱动程序问题

  • 2021年6月28日
  • 3回复
  • 102的浏览量
l

长话短说，W2016服务器从高压转向高压。VirtIO驱动程序是安装的(在迁移之前)，但是当机器在迁移到AHV后引导时，它是不可访问的引导设备。如果我经历了整个启动到恢复，删除驱动程序，注入驱动程序，它会启动，但那是很多手动处理。

当MOVE迁移到AHV时，它启动为SATA驱动器，然后它似乎克隆磁盘，并将其重新连接为SCSI驱动器。它以SATA的形式引导到桌面，但随后以SCSI驱动器的形式引导到桌面，因此驱动程序问题是有意义的。问题是为什么驱动程序在迁移之前安装在HV机器上时不能工作，迁移之后也不能工作。

Long story short, W2016 server moving from HV to AHV. VirtIO drivers are installed (before migration) but whenever the machine boots after migrating to AHV, it's bsods with inaccessible boot device. If I go through the whole booting to recovery, deleting the driver and injecting the driver, it boots up but that's a lot of manual handling.<\/p>

When MOVE migrates to AHV it boots up as SATA drive then it seems to clone the disk and reattaches it as a SCSI drive. It boots to the desktop as SATA but then as a SCSI drive it fails, so the driver issue makes sense. The issue is why the drivers are not working when they're installed on the HV machine before migration and don't work after.<\/p>","quoteUsername":"ListerOfSmeg","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">

3回复

dBizzleMcFizzle

我也经历过这种情况，它似乎也改变了SCSI ID的同时，有多个驱动器连接。

I\u2019m experiencing this too, it also seems to change the SCSI ID\u2019s at the same time when there are multiple drives attached.\u00a0<\/p>","quoteUsername":"dBizzleMcFizzle","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
B
徽章 ＋７

我也有同样的问题，dBizzle的回复…可以解释为什么只有我们的虚拟文件服务器受到这个问题的困扰，而不是只有一个驱动器连接的其他服务器。

I am having the same issue and the reply from dBizzle\u2026\u00a0would explain why it\u2019s only our virtual fileservers that are suffering from this and not our other servers with only 1 drive attached.<\/p>","quoteUsername":"bpr-admin","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
JeroenTielen
Userlevel 1
徽章 + 2

@bpr-admin你使用的是哪个版本的Nutanix Move ?我在过去看到过这个问题，在后来的版本中解决了移动。

@bpr-admin<\/user-mention>\u00a0which version of Nutanix Move are you using? I've seen isues in the past with this which where resolved in later versions on Move.\u00a0<\/p>","quoteUsername":"JeroenTielen","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">

回复


Baidu