解决了

在ESXi上安装Nutanix文件

  • 2021年2月19日
  • 1回复
  • 444的浏览量

我正在Esxi上安装Nutanix文件,但我被困在添加网络(通过vCenter)
我们找到了这个链接,但它不再可用
https://next.nutanix.com/nutanix-files-71/failing-afs-pre-check-deployment-add-network-through-vcenter-27924?postid=42955#post42955

对任何帮助表示感谢

图标

最佳答案Nupur。Sakhalkar2021年2月22日01:37

@RicGer<\/user-mention>\u00a0It looks like Prism is not able to see the available networks (i.e. port groups) present for your ESXi hosts.\u00a0<\/p>

As mentioned in the Nutanix Files deployment guide (https:\/\/portal.nutanix.com\/page\/documents\/details?targetId=Files-v3_8:fil-file-server-deploy-c.html<\/a>), there are certain pre-requisites for the Network pre-check during Nutanix Files deployment:<\/p>

  1. Configure storage and client network via vCenter\t
    1. Storage Network -\u00a0The VLAN that connects the Controller VM to the FSVM<\/li>\t\t
    2. Client network -\u00a0The VLAN that connects the FSVM to the AD and DNS<\/li>\t<\/ol><\/li>\t
    3. Have vCenter registered with all of the ESXi hosts<\/strong> in the AOS cluster managed by the same vCenter<\/strong>.<\/li>\t
    4. Register vCenter to Prism as well (https:\/\/portal.nutanix.com\/page\/documents\/details?targetId=Web-Console-Guide-Prism-v5_19:wc-vcenter-server-register-t.html<\/a>)<\/li><\/ol>

      Once you make sure that all the above network pre-checks are met, you can check if Uhura service can detect these available networks (portgroups configured for storage and client network).\u00a0Uhura service is the one which interfaces\u00a0with the management APIs in ESXi(via vCenter)\u00a0to allow user VMs to be managed from within Prism (along with the VM networks).<\/p>

      \u00a0<\/p>

      A quick way to verify if Uhura can see the available networks (portgroups) via Prism UI is to\u00a0check\u00a0whether you can see\u00a0available networks\u00a0while adding a new NIC during a test VM creation via Prism (https:\/\/portal.nutanix.com\/page\/documents\/details?targetId=Web-Console-Guide-Prism-v5_19:wc-vm-create-esxi-t.html<\/a>). You don\u2019t even have to create a new VM, just try to add a new NIC in the \u2018create VM\u2019 option and then verify if available networks can be seen in the dropdown list.<\/p>

      You can also check this via acli by running the following command from any one CVM (login as nutanix user) of your cluster:<\/p>

      acli uhura.network.list<\/code><\/pre>

      \u00a0<\/p>

      If you still don\u2019t see available networks(portgroups)\u00a0in Uhura, then there might be some issues between Uhura and vCenter communication. If this is the case, then you can open a ticket with us via Nutanix Support Portal<\/a>\u00a0to further troubleshoot this issue.\u00a0<\/p>","className":"post__content__best_answer"}">

查看原始

本主题已关闭供评论

1回复

Userlevel 2
徽章 +4

@RicGer它看起来像棱镜无法看到可用的网络(即端口组)为您的ESXi主机。

正如在Nutanix Files部署指南中提到的那样(https://portal.nutanix.com/page/documents/details?targetId=Files-v3_8:fil-file-server-deploy-c.html),在部署Nutanix Files时,网络预检查有一些先决条件:

  1. 通过vCenter配置存储和客户端网络
    1. 存储网络—Controller VM连接FSVM的VLAN
    2. 客户端网络—FSVM连接AD、DNS的VLAN
  2. 注册vCenter所有ESXi主机管理的AOS集群同样的vCenter
  3. 将vCenter注册到Prism (https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v5_19:wc-vcenter-server-register-t.html

一旦您确保满足上述所有网络预检查,您就可以检查Uhura服务是否可以检测到这些可用的网络(为存储和客户端网络配置的端口组)。Uhura服务是一种与ESXi(通过vCenter)中的管理api接口的服务,允许用户虚拟机从Prism(连同虚拟机网络)中被管理。

一个快速的方法来验证Uhura是否可以通过Prism UI看到可用的网络(端口组),是检查您是否可以看到可用的网络,而添加一个新的网卡在测试虚拟机创建期间通过Prism (https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v5_19:wc-vm-create-esxi-t.html).你甚至不需要创建一个新的虚拟机,只需要尝试在“创建虚拟机”选项中添加一个新的网卡,然后验证下拉列表中是否可以看到可用的网络。

你也可以通过acli从你的集群的任何一个CVM(以nutanix用户登录)运行以下命令来检查:

acli uhura.network.list

如果你在Uhura中仍然看不到可用的网络(端口组),那么Uhura和vCenter之间的通信可能会出现一些问题。如果是这样,那么你可以通过我们打开一张票Nutanix支持门户进一步解决此问题。

Baidu