解决了

在ESXI上安装nutanix文件

  • 2021年2月19日
  • 1回复
  • 669意见
r

我正在在ESXI上安装nutanix文件，但我卡在添加网络（通过vcenter）
我们找到了这个链接，但不再可用
https://next.nutanix.com/nutanix-files-71/failing-afs-pre-check-deployment-add-network-throww-through-vcenter-27924?postID=42955#post4295555

任何帮助都将受到赞赏

图标

最好的答案Nupur.Sakhalkar2021年2月22日，01：37

@RicGer<\/user-mention>\u00a0It looks like Prism is not able to see the available networks (i.e. port groups) present for your ESXi hosts.\u00a0<\/p>

As mentioned in the Nutanix Files deployment guide (https:\/\/portal.nutanix.com\/page\/documents\/details?targetId=Files-v3_8:fil-file-server-deploy-c.html<\/a>), there are certain pre-requisites for the Network pre-check during Nutanix Files deployment:<\/p>

  1. Configure storage and client network via vCenter\t
    1. Storage Network -\u00a0The VLAN that connects the Controller VM to the FSVM<\/li>\t\t
    2. Client network -\u00a0The VLAN that connects the FSVM to the AD and DNS<\/li>\t<\/ol><\/li>\t
    3. Have vCenter registered with all of the ESXi hosts<\/strong> in the AOS cluster managed by the same vCenter<\/strong>.<\/li>\t
    4. Register vCenter to Prism as well (https:\/\/portal.nutanix.com\/page\/documents\/details?targetId=Web-Console-Guide-Prism-v5_19:wc-vcenter-server-register-t.html<\/a>)<\/li><\/ol>

      Once you make sure that all the above network pre-checks are met, you can check if Uhura service can detect these available networks (portgroups configured for storage and client network).\u00a0Uhura service is the one which interfaces\u00a0with the management APIs in ESXi(via vCenter)\u00a0to allow user VMs to be managed from within Prism (along with the VM networks).<\/p>

      \u00a0<\/p>

      A quick way to verify if Uhura can see the available networks (portgroups) via Prism UI is to\u00a0check\u00a0whether you can see\u00a0available networks\u00a0while adding a new NIC during a test VM creation via Prism (https:\/\/portal.nutanix.com\/page\/documents\/details?targetId=Web-Console-Guide-Prism-v5_19:wc-vm-create-esxi-t.html<\/a>). You don\u2019t even have to create a new VM, just try to add a new NIC in the \u2018create VM\u2019 option and then verify if available networks can be seen in the dropdown list.<\/p>

      You can also check this via acli by running the following command from any one CVM (login as nutanix user) of your cluster:<\/p>

      acli uhura.network.list<\/code><\/pre>
      \u00a0<\/p>
      If you still don\u2019t see available networks(portgroups)\u00a0in Uhura, then there might be some issues between Uhura and vCenter communication. If this is the case, then you can open a ticket with us via Nutanix Support Portal<\/a>\u00a0to further troubleshoot this issue.\u00a0<\/p>","className":"post__content__best_answer"}">
查看原件
该主题已关闭以供评论

1回复

n
秩
UserLevel 3
徽章 +5

@ricger看来Prism无法看到您的ESXI主机存在的可用网络（即端口组）。

如nutanix文件部署指南（https://portal.nutanix.com/page/documents/details?targetId=files-v3_8:fil-file-file-server-deploy-c.html），在Nutanix文件部署期间，网络预检查的某些先决条件：

  1. 通过vCenter配置存储和客户端网络
    1. 存储网络 - 将控制器VM连接到FSVM的VLAN
    2. 客户网络 - 将FSVM连接到AD和DNS的VLAN
  2. 已注册vCenter所有ESXI主机在由AOS群集管理的同一vCenter。
  3. 也将vCenter注册到棱镜上（https://portal.nutanix.com/page/documents/details?targetId=web-console-guide-prism-v5_19:wc-vcenter-server-register-register-register-t.html）

确保满足上述所有网络预签名后，您可以检查Uhura服务是否可以检测这些可用网络（为存储和客户端网络配置的PortGroups）。Uhura服务是与ESXI（通过vCenter）中的管理API接口的服务，以允许从Prism内部管理用户VM（以及VM网络）。

一种快速的方法来验证Uhura是否可以通过Prism UI看到可用的网络（PortGroups）是检查您是否可以在通过PRISM的测试VM创建期间添加新的NIC时是否可以看到可用的网络（https://portal.nutanix.com/page/documents/details?targetId=web-console-guide-prism-v5_19:wc-vm-vm-create-esxi-t.html）。您甚至不必创建新的VM，只需尝试在“创建VM”选项中添加新的NIC，然后验证是否可以在下拉列表中看到可用的网络。

您也可以通过ACLI通过从任何一个CVM（登录为Nutanix用户）的以下命令来检查此内容：

acli uhura.network.list

如果您仍然没有在Uhura看到可用的网络（Portgroups），那么Uhura和Vcenter通信之间可能存在一些问题。如果是这种情况，那么您可以通过Nutanix支持门户进一步解决此问题。

@RicGer<\/user-mention>\u00a0It looks like Prism is not able to see the available networks (i.e. port groups) present for your ESXi hosts.\u00a0<\/p>

As mentioned in the Nutanix Files deployment guide (https:\/\/portal.nutanix.com\/page\/documents\/details?targetId=Files-v3_8:fil-file-server-deploy-c.html<\/a>), there are certain pre-requisites for the Network pre-check during Nutanix Files deployment:<\/p>

  1. Configure storage and client network via vCenter\t
    1. Storage Network -\u00a0The VLAN that connects the Controller VM to the FSVM<\/li>\t\t
    2. Client network -\u00a0The VLAN that connects the FSVM to the AD and DNS<\/li>\t<\/ol><\/li>\t
    3. Have vCenter registered with all of the ESXi hosts<\/strong> in the AOS cluster managed by the same vCenter<\/strong>.<\/li>\t
    4. Register vCenter to Prism as well (https:\/\/portal.nutanix.com\/page\/documents\/details?targetId=Web-Console-Guide-Prism-v5_19:wc-vcenter-server-register-t.html<\/a>)<\/li><\/ol>

      Once you make sure that all the above network pre-checks are met, you can check if Uhura service can detect these available networks (portgroups configured for storage and client network).\u00a0Uhura service is the one which interfaces\u00a0with the management APIs in ESXi(via vCenter)\u00a0to allow user VMs to be managed from within Prism (along with the VM networks).<\/p>

      \u00a0<\/p>

      A quick way to verify if Uhura can see the available networks (portgroups) via Prism UI is to\u00a0check\u00a0whether you can see\u00a0available networks\u00a0while adding a new NIC during a test VM creation via Prism (https:\/\/portal.nutanix.com\/page\/documents\/details?targetId=Web-Console-Guide-Prism-v5_19:wc-vm-create-esxi-t.html<\/a>). You don\u2019t even have to create a new VM, just try to add a new NIC in the \u2018create VM\u2019 option and then verify if available networks can be seen in the dropdown list.<\/p>

      You can also check this via acli by running the following command from any one CVM (login as nutanix user) of your cluster:<\/p>

      acli uhura.network.list<\/code><\/pre>
      \u00a0<\/p>
      If you still don\u2019t see available networks(portgroups)\u00a0in Uhura, then there might be some issues between Uhura and vCenter communication. If this is the case, then you can open a ticket with us via Nutanix Support Portal<\/a>\u00a0to further troubleshoot this issue.\u00a0<\/p>","quoteUsername":"Nupur.Sakhalkar","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
Learn more about our cookies.<\/a>","cookiepolicy.button":"Accept cookies","cookiepolicy.button.deny":"Deny all","cookiepolicy.link":"Cookie settings","cookiepolicy.modal.title":"Cookie settings","cookiepolicy.modal.content":"We use 3 different kinds of cookies. You can choose which cookies you want to accept. We need basic cookies to make this site work, therefore these are the minimum you can select. Learn more about our cookies.<\/a>","cookiepolicy.modal.level1":"Basic
Functional","cookiepolicy.modal.level2":"Normal
Functional + analytics","cookiepolicy.modal.level3":"Complete
Functional + analytics + social media + embedded videos"}}}">
Baidu