解决了

棱镜中心内的快照

  • 2020年4月23日
  • 5回复
  • 2891的浏览量
米
徽章 ＋1
  • MrMike
  • 开拓者
  • 17日回复

对于我的大多数处于保护域中的虚拟机，Prism central中的快照选项是灰色的。当鼠标悬停在该选项上时，会弹出“一个或多个选定的虚拟机通过传统的容灾特性被保护”的提示信息。这些虚拟机只能在各自的PE集群上创建快照。”不在保护域中的虚拟机不显示该选项。这是为什么呢?什么是遗留DR特性?

图标

最佳答案AntonioG2020年4月27日，00:41

\u00a0<\/h2>

Sorry Mike,<\/p>

Here is the content of the KB. Let me know if this helps.\u00a0<\/p>

This issue can be found when a customer is using Prism Central to connect Xi-Leap or Leap PC-PC, and is attempting to protect or take a snapshot of a VM from Prism Central when the VM is already protected by a legacy DR (Async).

When attempting to take the snapshot of the VM from PC, the \"snapshot\" option will be greyed out and a message will be displayed saying \"One of more of the selected VMs are protected via Legacy DR\".<\/p>


\u00a0<\/p>

\"PC-error\"<\/p>

This is an expected behavior as Nutanix Engineering do not want to mix up the PC workflows with those of PE. In future releases of PC, the error message displayed will be more descriptive to what the corrective actions are with respect to the issue.

If customer wants to move from Legacy DR and start using the Leap (PC) workflows, they will need to first come out of legacy workflow and from that point, start using PC-based workflows.<\/p>","className":"post__content__best_answer"}">

查看原始
For most of my vm\u2019s that are in protection domains, the snapshot option is grayed out in Prism Centeral.\u00a0 Hovering over the option I get a popup with message \u201cOne or more of selected VMs is protected via legacy DR feature.\u00a0 Snapshots for these VMs can be taken from respective PE clusters only.\u201d\u00a0 This option is not grayed out for vms that are not in protection domains.\u00a0 Why is that?\u00a0 What are legacy DR features?<\/p>","quoteUsername":"MrMike","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">

5回复

AntonioG
排名
Userlevel 2
徽章 + 4

嗨MrMike。

这个知识库描述了你的问题，如果这是你的情况，请让我知道如果你需要额外的帮助。

受旧容灾保护时，不支持从PC对虚拟机进行快照

https://portal.nutanix.com/kb/7722

请注意: Legacy DR = Legacy容灾/异步，请参考以下kb了解更多关于容灾/异步的信息

异步容灾保护域配置

海军学校规则。

安东尼奥

米
徽章 ＋1

嗨MrMike。

这个知识库描述了你的问题，如果这是你的情况，请让我知道如果你需要额外的帮助。

受旧容灾保护时，不支持从PC对虚拟机进行快照

https://portal.nutanix.com/kb/7722

请注意: Legacy DR = Legacy容灾/异步，请参考以下kb了解更多关于容灾/异步的信息

异步容灾保护域配置

海军学校规则。

安东尼奥

你好,安东尼奥,

该链接重定向到https://portal.nutanix.com/page/documents/kbs/details/?targetId=kA00e0000009E0XCAU这是一个空白页。(在我认证后)你可以张贴一个工作链接或pdf的kb?

谢谢

Hi MrMike.<\/p>

This kb describes the issue you are having, pleae check if this is your case an let me know if you need additional assistance.<\/p>

\u00a0<\/p>

VM cannot be snapshot from PC when protected by legacy DR<\/em><\/p>

https:\/\/portal.nutanix.com\/kb\/7722<\/a><\/p>

\u00a0<\/p>

Note<\/em><\/strong>: Legacy DR = legacy DR\/Async, refer to the following kb to know more about DR\/Async<\/p>

ASYNC DR PROTECTION DOMAIN CONFIGURATION<\/a><\/p>

\u00a0<\/p>

Regs.<\/p>

Antonio<\/p> <\/content-quote>

Hello Antonio,<\/p>

\u00a0<\/p>

That link redirects to\u00a0https:\/\/portal.nutanix.com\/page\/documents\/kbs\/details\/?targetId=kA00e0000009E0XCAU<\/a>\u00a0which is a blank page. (After I authenticate)\u00a0 Can you post a working link or a pdf of the kb?<\/p>

\u00a0<\/p>

Thanks<\/p>","quoteUsername":"MrMike","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">

AntonioG
排名
Userlevel 2
徽章 + 4

对不起迈克,

下面是KB的内容。如果有帮助请告诉我。

现象描述当客户使用Prism Central连接Xi-Leap或Leap PC-PC时，当虚拟机已经被旧容灾(Async)保护时，试图使用Prism Central对虚拟机进行保护或快照。

当从PC上获取虚拟机快照时，“快照”选项会灰化，并提示“所选的多个虚拟机中有一个受Legacy容灾保护”。


PC-error

这是一个预期的行为，因为Nutanix工程不想混淆PC工作流程和那些PE。在未来的PC版本中，显示的错误信息将更详细地描述关于该问题的纠正措施。

如果客户想从遗留的DR转移到使用Leap (PC)工作流，他们将需要首先从遗留的工作流中走出来，然后从那里开始使用基于PC的工作流。

\u00a0<\/h2>

Sorry Mike,<\/p>

Here is the content of the KB. Let me know if this helps.\u00a0<\/p>

This issue can be found when a customer is using Prism Central to connect Xi-Leap or Leap PC-PC, and is attempting to protect or take a snapshot of a VM from Prism Central when the VM is already protected by a legacy DR (Async).

When attempting to take the snapshot of the VM from PC, the \"snapshot\" option will be greyed out and a message will be displayed saying \"One of more of the selected VMs are protected via Legacy DR\".<\/p>


\u00a0<\/p>

\"PC-error\"<\/p>

This is an expected behavior as Nutanix Engineering do not want to mix up the PC workflows with those of PE. In future releases of PC, the error message displayed will be more descriptive to what the corrective actions are with respect to the issue.

If customer wants to move from Legacy DR and start using the Leap (PC) workflows, they will need to first come out of legacy workflow and from that point, start using PC-based workflows.<\/p>","quoteUsername":"AntonioG","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">

米
徽章 ＋1

对不起迈克,

下面是KB的内容。如果有帮助请告诉我。

现象描述当客户使用Prism Central连接Xi-Leap或Leap PC-PC时，当虚拟机已经被旧容灾(Async)保护时，试图使用Prism Central对虚拟机进行保护或快照。

当从PC上获取虚拟机快照时，“快照”选项会灰化，并提示“所选的多个虚拟机中有一个受Legacy容灾保护”。


PC-error

这是一个预期的行为，因为Nutanix工程不想混淆PC工作流程和那些PE。在未来的PC版本中，显示的错误信息将更详细地描述关于该问题的纠正措施。

如果客户想从遗留的DR转移到使用Leap (PC)工作流，他们将需要首先从遗留的工作流中走出来，然后从那里开始使用基于PC的工作流。

这回答了我的问题。这种情况太糟糕了，因为棱镜中心的基于角色的管理要好得多。如果Nutanix Engineering为快照添加一些额外的任务，可以连接到Prism Central中的角色，那就太好了。这样你就可以给用户指定一个虚拟机的子集，让他们可以访问控制台(你已经可以在PC上这么做了)，并允许他们进行快照和恢复。api后端已经在PE中允许快照，所以它不会花太多时间把它连接到PC上。我想我会提交一个提升申请。有什么地方可以查看和支持增强请求吗?

\u00a0<\/h2>

Sorry Mike,<\/p>

Here is the content of the KB. Let me know if this helps.\u00a0<\/p>

This issue can be found when a customer is using Prism Central to connect Xi-Leap or Leap PC-PC, and is attempting to protect or take a snapshot of a VM from Prism Central when the VM is already protected by a legacy DR (Async).

When attempting to take the snapshot of the VM from PC, the \"snapshot\" option will be greyed out and a message will be displayed saying \"One of more of the selected VMs are protected via Legacy DR\".<\/p>


\u00a0<\/p>

\"PC-error\"<\/p>

This is an expected behavior as Nutanix Engineering do not want to mix up the PC workflows with those of PE. In future releases of PC, the error message displayed will be more descriptive to what the corrective actions are with respect to the issue.

If customer wants to move from Legacy DR and start using the Leap (PC) workflows, they will need to first come out of legacy workflow and from that point, start using PC-based workflows.<\/p> <\/content-quote>

That answers my question.\u00a0 It is too bad that that is the case though since role based administration is way better in Prism Central.\u00a0 It would be nice if Nutanix Engineering added some additional tasks for snapshots that can be connected to roles in Prism Central. That way you could designate users a subset of vms that had console access\u00a0(which you can already do in PC) and were allowed to snap and restore.\u00a0 The api backend is already there in PE to allow snapshots so it wouldn\u2019t take much to wire it into PC. I guess I will send in an enhancement request.\u00a0 Is there any place to see and upvote enhancement requests?<\/p>","quoteUsername":"MrMike","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">

AntonioG
排名
Userlevel 2
徽章 + 4

我同意MrMike,

要请求RFE，您必须打开一个案例并选择问题类型RFE，即增强请求。

RFE将被添加到ENG或FEAT中。


ENG编号可以被客户引用，以便在发布说明中查看他们的发布。


我们使用案例来投票ENG/FEAT门票。

海军学校规则。

安东尼奥

I agree\u00a0MrMike,<\/p>

To ask for a RFE you must open a case and select issue type RFE, Request for Enhancement.<\/p>

The RFE will be added to an ENG or FEAT.<\/p>


The\u00a0ENG number can be referenced to the customer to watch for their release in the release notes.<\/p>


We use the cases to upvote the ENG\/FEAT tickets.<\/p>

\u00a0<\/p>

Regs.<\/p>

Antonio<\/p>","quoteUsername":"AntonioG","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">

回复


Baidu