Cisco Ironport安装Nutanix AHV

  • 2016年11月1日
  • 9回复
  • 2362意见
一个
徽章 +1
你好，
有人可以帮助我知道，如果我想对Nutanix AHV隐含Cisco Iromport虚拟设备，那么在AHV中是否可以？
虚拟设备在OVF中可用。
    \nCan somebody help me to know that if I want to implment Cisco Iromport Virtual Appliance on Nutanix AHV ,Is it possible in AHV ?
    \nThe Virtual Appliance is curently available in OVF .","quoteUsername":"abhaycs","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
    该主题已关闭以供评论

    9回复

    乔恩
    秩
    UserLevel 6
    徽章 +29
    如果将磁盘图像上传到OVF/OVA中，则可以将其用作磁盘图像，以在AHV中制作新的VM。您需要分配CPU，内存和网络。

    最大的挑战可能是Cisco Ironport支持Virtio，这是基于KVM的Nutanix AHV（例如Nutanix AHV）使用的高性能网络和存储设备驱动程序。

    当您制作VM时，这是由IDE/PCI/SCSI设置控制的。要通过CLI完成的要转换为远离Virtio的网络组件，因此让我们保存该步骤，直到仅在需要后才进行。

    尝试一下，并在此过程中发布屏幕截图，我们很乐意为您提供帮助。
    乔恩·科勒|Nutanix工程技术总监|Nutanix NPX＃003，VCDX＃116 |@jonkohler |如果有用的话，请荣誉！
    \n
    \nThe biggest challenges will likely be if Cisco IronPort supports VirtIO, which is the high performance network and storage device drivers used by KVM-based hypervisors like Nutanix AHV.
    \n
    \nThis is controlled by the IDE\/PCI\/SCSI setting when you make the VM. The network component to switch away from VirtIO is done via CLI, so let's save that step until only after its needed.
    \n
    \nGive it a try, and post screenshots along the way and we'd be happy to help.","quoteUsername":"Jon","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
    一个
    徽章 +1
    你好，
    根据思科的说法，它的Ironport确实支持KVM，并随后支持Virtio。
    在这种情况下，在Nutanix AHV上安装Ironport时，它会构成任何挑战吗？
    请确认
    \nAs per Cisco ,it's Ironport do support KVM and subsequently support VirtIO as well.
    \nIn this case does it pose any challange while installing the Ironport on Nutanix AHV?
    \nPlease confirm","quoteUsername":"abhaycs","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
    乔恩
    秩
    UserLevel 6
    徽章 +29
    - 应该没问题，我确实检查了Cisco内容安全性的安装指南（铁端口的新名称）：http://www.cisco.com/c/dam/en/us/td/docs/security/content_security/virtual_appliances/cisco_content_security_security_virtual_virtual_appliance_install_guide.pdf

    KVM安装步骤非常简单。

    注意：这些步骤在Nutanix AHV上不会完全相同，因为我们不使用firt-manager或firt-install，您可以通过PRISM使用CPU/内存创建VM，并与ISO一起安装软件。实际上，它比常规KVM容易得多。
    乔恩·科勒|Nutanix工程技术总监|Nutanix NPX＃003，VCDX＃116 |@jonkohler |如果有用的话，请荣誉！
    http:\/\/www.cisco.com\/c\/dam\/en\/us\/td\/docs\/security\/content_security\/virtual_appliances\/Cisco_Content_Security_Virtual_Appliance_Install_Guide.pdf<\/a>
    \n
    \nand the KVM install steps are pretty straight forward.
    \n
    \nNote: These steps would NOT be exactly the same on Nutanix AHV, as we dont use virt-manager or virt-install, you could just create a VM with the CPU\/memory you need through Prism, and install the software with the ISO. It's actually quite a bit easier than regular KVM is.","quoteUsername":"Jon","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
    b
    UserLevel 4
    徽章 +17
    我没有在AHV上部署Ironport虚拟设备的经验，但是使用基于硬件的Ironport玩很多
    上次我在AHV上部署Avaya Aura（Linux）
    - 使用TAR –XVF或使用VMware独立转换器UNTAR OVA
    - 检查.vmx for配置VM
    - 使用图像服务上传.vmdk到AHV
    - 创建VM
    - 将磁盘文件安装到VM

    我没有发现关于使用Linux的驱动程序的问题
    很高兴在AHV上看到您的Ironport（FreeBSD）的更新
    \nLast time I deployed Avaya Aura (Linux) on AHV
    \n- Untar OVA using tar \u2013xvf or using vmware standalone converter
    \n- Check .vmx for config VM
    \n- Upload .vmdk to AHV using Image Service
    \n- Create VM
    \n- Mount the disk file to the VM
    \n
    \nI found no issue regarding driver as Aura using Linux
    \nWill be nice to see your update for the Ironport (FreeBSD) on AHV","quoteUsername":"bezeddin","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
    一个
    秩
    徽章 +3
    最近，正在帮助客户在AHV中部署该设备。版本9.7没有启动，但是当我们尝试使用版本10（最新）时，它没有问题。这些是细节：

    产品：思科C660V电子邮件安全虚拟设备
    型号：C600V版本：10.0.1-087构建日期：2017-01-07

    我建议在AHV部署时尝试此版本。
    \n
    \nProduct: Cisco C660V Email Security Virtual Appliance
    \nModel: C600V Version: 10.0.1-087 Build date: 2017-01-07
    \n
    \nI would suggest trying this version when deploying in AHV.","quoteUsername":"Alex","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
    一个
    徽章
    到目前为止，我对AHV上的任何Cisco“虚拟”设备都没有运气。思科ASAV和WLCV就是几个示例。该机器被构建并开始启动过程，但是似乎是“数字签名”检查的失败。就我而言，看来思科正在寻找主机BIOS的CPU标志为“红帽”，这与我们的主人不符。
    到目前为止，我已经打开了一个没有运气的TAC案。
    如果有人在实施ASAV或其他Cisco虚拟产品方面取得了成功，我将不胜感激。

    谢谢。
    \nI've opened up a TAC case with no luck so far.
    \nIf anyone has had success in implementing an ASAv or other Cisco virtual products, i'd appreciate the feedback.
    \n
    \nThanks.","quoteUsername":"amerritt","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
    一个
    秩
    徽章 +3
    有一种禁用AHV品牌的方法。我建议打开一个带有Nutanix支持的案例，他们将为您提供有关如何应用它的帮助。
    一个
    UserLevel 2
    徽章 +7
    你能分享指南吗？
    一个
    UserLevel 2
    徽章 +7
    disable_branding = disable nutanix brandingacli vm.update xxxx disable_branding = true
    条款和条件
    Learn more about our cookies.<\/a>","cookiepolicy.button":"Accept cookies","cookiepolicy.button.deny":"Deny all","cookiepolicy.link":"Cookie settings","cookiepolicy.modal.title":"Cookie settings","cookiepolicy.modal.content":"We use 3 different kinds of cookies. You can choose which cookies you want to accept. We need basic cookies to make this site work, therefore these are the minimum you can select. Learn more about our cookies.<\/a>","cookiepolicy.modal.level1":"Basic
    Functional","cookiepolicy.modal.level2":"Normal
    Functional + analytics","cookiepolicy.modal.level3":"Complete
    Functional + analytics + social media + embedded videos"}}}">
    Baidu