问题

OSD通过SCCM问题AOS 5.10

e
尝试使用SCCM在AHV上部署服务器2016时继续遇到错误。最近有什么变化吗？我使用了Virtio v.1.1.4。您还必须在SCCM中拥有NGT吗？

6个答复

ddubuque
UserLevel 3
徽章 +10
要在AHV上进行映像，您需要在尝试开始成像过程之前将WIM注入Virtio驱动程序，以便看到存储。较旧的Virtio版本应该很好，尽管在将其作为福音之前，我会与支持。

  1. 您正在使用什么版本的AO？
  2. 您正在运行什么版本的AHV？
  3. 您看到的错误消息是什么？
大卫·杜比克（David Dubuque）||BKD ||Nutanix NTC 2019和2020 ||Nutanix技术咨询委员会成员||https://darklinkrising.com
\r\n
\r\n
    \r\n
  1. What version of AOS are you using? \r\n
  2. What version of AHV are you running? \r\n
  3. What is the error message you're seeing? \r\n<\/ol>","quoteUsername":"ddubuque","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
e
WIM确实注入了Virtio版本1.1.4驱动程序。我正在运行AOS 5.10.1.1，AHV 20170830.185，错误只是任务序列的通用错误。另一方面，如何进入复制到VM的SCCM日志？（https：//大约：空白）
ddubuque
UserLevel 3
徽章 +10
当任务序列未能打开命令提示符导航到所需的日志，然后使用XCopy之类的内容将日志移至需要的位置时，请单击F8。


Windows PE
（在格式化硬盘之前）
x：\ windows \ temp \ smstslog \ smsts.log

Windows PE
（将硬盘格式化后）
x：\ smstslog \ smsts.log并复制到c：\ _ smstask sequence \ logs \ smstslog \ smsts.log

Windows操作系统
（在安装SCCM客户端之前）
c：\ _ smstask sequence \ logs \ smstslog \ smsts.log
Windows操作系统

（安装SCCM客户端后）
C：\ Windows \ ccm \ logs \ smstslog \ smsts.log
Windows操作系统

（完成任务序列完成时）
C：\ Windows \ ccm \ logs \ smsts.log

在失败时，不知道任务序列在何处或为什么或为什么要做什么。如果它成功创建磁盘并开始安装内容，那么我怀疑这是一个nutanix问题，但任务序列本身更可能是一个问题。如果您无法格式化驱动器并开始安装操作系统，那么与EFI与BIOS的成像有关的问题可能是任何内容。不考虑EFI选项的DHCP选项问题（如果您将EFI作为启动选项成像，请与您的网络团队交谈）。如果您最近从BIOS更改为EFI，这将更加相关。不幸的是，没有更多信息，这可能是很多事情。
大卫·杜比克（David Dubuque）||BKD ||Nutanix NTC 2019和2020 ||Nutanix技术咨询委员会成员||https://darklinkrising.com
\r\n
\r\n
\r\nWindows PE
\r\n(Before the hard disk are formatted)
\r\nx:\\windows\\temp\\smstslog\\smsts.log
\r\n
\r\nWindows PE
\r\n(After the hard disk are formatted)
\r\nx:\\smstslog\\smsts.log and copied to c:\\_SMSTaskSequence\\Logs\\Smstslog\\smsts.log
\r\n
\r\nWindows Operating System
\r\n(Before the SCCM client is installed)
\r\nc:\\_SMSTaskSequence\\Logs\\Smstslog\\smsts.log
\r\nWindows Operating System
\r\n
\r\n(After the SCCM client is installed)
\r\nc:\\windows\\ccm\\logs\\Smstslog\\smsts.log
\r\nWindows Operating System
\r\n
\r\n(When the Task Sequence is complete)
\r\nc:\\windows\\ccm\\logs\\smsts.log
\r\n
\r\nWithout knowing where or why or what the task sequence is trying to do at the moment of failure it's hard to say. If it successfully creates a disk and begins installing stuff, then I doubt this is a Nutanix issue, but more likely an issue with the task sequence itself. If you're unable to format a drive and start installing the OS, then it could be anything from an issue with imaging with EFI versus BIOS. A DHCP option issue not taking into account EFI options (talk to your network team if you're imaging with EFI as your boot option). If you've recently changed from BIOS to EFI, this would be more relevant. Unfortunately without more information, this could be a litany of things.","quoteUsername":"ddubuque","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
n
Userlevel 1
徽章 +2
我最喜欢的OSD故障排除步骤：
  • F8到打开命令提示
  • ipconfig-验证为NIC加载的驱动程序
  • 通过DNS名称ping管理点和分配点 - 验证上游网络连接和DNS分辨率
  • diskpart>列表磁盘 - 验证已加载用于存储的驱动程序
  • cmtrace-开始挖掘smsts.log
正如Ddubuque所提到的那样，没有实际错误消息，我们无法告诉您很多，或者在其停止任务序列中的哪个步骤等。
\r\n
    \r\n
  • F8 to open command prompt \r\n
  • ipconfig - verify drivers loaded for the NIC \r\n
  • ping the management point and distribution point by DNS name - verifies upstream network connectivity and DNS resolution \r\n
  • diskpart > list disk - verify drivers loaded for storage \r\n
  • cmtrace - start digging through the smsts.log \r\n<\/ul>\r\nAs ddubuque mentioned, there is not much we can tell you without an actual error message, or what step during the task sequence it stopped, etc. You mention that the WIM has the VirtIO drivers, but does the boot image have the VirtIO drivers?","quoteUsername":"neilthemann","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
e
查看日志后，遇到的第一个错误是“分区1比剩余磁盘空间大。请求的分区大小：107374182400，剩余大小：85791741440”。“指定的配置无效。请确保任务序列已正确配置。OSDDISKPART.EXE失败：0x8000ffff。无法运行操作：格式和分区磁盘6.1。

是的，启动图像也具有Virtio驱动程序。
\r\n
\r\nYes, the boot image also has the VirtIO drivers as well.","quoteUsername":"evanju","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
e
启动图像应该只有Nutanix Virtio驱动程序吗？总共只有3个？我也看到了许多其他与VMware相关的驱动程序。

回复


条款和条件
Learn more about our cookies.<\/a>","cookiepolicy.button":"Accept cookies","cookiepolicy.button.deny":"Deny all","cookiepolicy.link":"Cookie settings","cookiepolicy.modal.title":"Cookie settings","cookiepolicy.modal.content":"We use 3 different kinds of cookies. You can choose which cookies you want to accept. We need basic cookies to make this site work, therefore these are the minimum you can select. Learn more about our cookies.<\/a>","cookiepolicy.modal.level1":"Basic
Functional","cookiepolicy.modal.level2":"Normal
Functional + analytics","cookiepolicy.modal.level3":"Complete
Functional + analytics + social media + embedded videos"}}}">
Baidu