解决了

Windows 2008 R2和Windows 2012 R2 chkdsk /f系统下电/挂起

  • 2017年4月15日
  • 2回答
  • 1175的浏览量
C
Userlevel 1
徽章 + 11
  • CTI
  • 开拓者
  • 12个回复
你好,
运行3节点联想HX1310, AHV 5.01。

我会在Nutanix的支持下开张。这更多的是供参考....

首次在SBS 2011标准版(又名Windows 2008 R2 x64)中看到此问题。从Hyper-V 2012 R2迁移后。我遇到系统会冻结的问题。我一开始以为是ShadowProtect备份造成的，但后来它开始在深夜发生。我认为是WBengine服务(又名块级备份)。

我安装了一个新的测试Windows 2008 R2，有两个卷，C:和E:。
当我在c:驱动器上运行chkdsk时，它会到达最后，阶段3，然后虚拟机关机。我必须手动启动。
所以我尝试了它在E:没有数据是新鲜的格式化。运行chkdsk，虚拟机关机。

更新:刚刚在Windows 2012R2服务器上尝试了相同的chkdsk /f，出现了相同的症状。

提前谢谢,

G
图标

最佳答案CTI2017年4月22日16:21

\nFinal update, it seems that my hanging issue was due to the NetKVM driver. Upgrading the NetKVM to version 1.118 seem to fix it. Server is normal again.
\n
\nI'm going to wait until tech suppport comes up with a fix for the chkdsk solution that is more automated. I don't run chkdsk very often.
\n
\nThanks
\nG","className":"post__content__best_answer"}">
查看原始
\nRunning 3 node Lenovo HX1310 with AHV 5.01.
\n
\nI will be opening a ticket with Nutanix support. This more of an FYI....
\n
\nFirst saw this issue with and SBS 2011 Standard (aka Windows 2008 R2 x64). After migrating from Hyper-V 2012 R2. I was\/am having issues where the system would freeze. I first thought it was ShadowProtect backups causing, but then it started happening late at night. I think its the WBengine Service (aka Block Level Backup).
\n
\nI setup a fresh test Windows 2008 R2 with 2 volumes, C: and E:.
\nWhen I ran chkdsk on the c: drive it gets to the end, stage 3 of 3, and then the VM powers off. I have to start it manually.
\nSo I tried it on the E: that has no data is freshly formatted. I run chkdsk, and the VM powers off.
\n
\nUpdate:Just tried the same chkdsk \/f on a Windows 2012R2 server and the same symptoms appear.
\n
\nThanks in Advance,
\n
\nG","quoteUsername":"CTI","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">

2回答

C
Userlevel 1
徽章 + 11
你好,
这篇文章只是一个更新。
首先，也是最重要的，我想感谢大卫·格里芬的技术支持。他在这个问题上真的进步了!!
这似乎是一些与Windows虚拟机来宾的scsi_passthru有关的bug。从我观察到的支持David的情况来看，磁盘是不经过passthru从scsi克隆到scisi的。之后，chkdsk /f进程正常工作。我们首先在Windows 2012 R2测试虚拟机上做了这个测试，以确保它能够正常工作。

然后，我们在SBS 2011服务器上执行此任务，并能够运行chkdsk。希望这停止了我与这个服务器冻结的问题。

同时,
在事件日志中，我将注意到当服务器启动时，事件日志中w32time服务启动之前的时间以小时为单位关闭。我们应用了KB3134，最重要的是需要关闭Guest VM。重新引导没有生效!!!!

感谢你的阅读……

G
\nThis post is just an update.
\nFirstly and most importantly, I want acknowledge David Griffin in tech support. He really stepped up on this issue !!!
\nIt seems to be some sort of bug that has something do with scsi_passthru on the Windows VM Guests. From what I observed with David in support is that the disks were cloned from scsi to scisi without passthru. After that, process, chkdsk \/f worked normally. We did this first on a Windows 2012 R2 test VM to ensure it worked.
\n
\nWe then performed this task on my SBS 2011 server and we were able to run a chkdsk. Hopefully this stops the issue I was having with this server freezing.
\n
\nAlso,
\nIn the event logs, I would notice that when a server would boot, the time in the event log prior to the w32time service starting was off by hours. We applied KB3134 and most importantly you need to power down the Guest VM. Reboot did not take effect!!!!
\n
\nThanks for reading....
\n
\nG","quoteUsername":"CTI","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
C
Userlevel 1
徽章 + 11
你好,
最后的更新，似乎我的挂起问题是由于NetKVM驱动程序。将NetKVM升级到1.118版本似乎可以解决这个问题。服务器恢复正常。

我将等待技术支持人员为chkdsk解决方案提出一个更加自动化的修复方案。我不经常运行chkdsk。

谢谢
G
\nFinal update, it seems that my hanging issue was due to the NetKVM driver. Upgrading the NetKVM to version 1.118 seem to fix it. Server is normal again.
\n
\nI'm going to wait until tech suppport comes up with a fix for the chkdsk solution that is more automated. I don't run chkdsk very often.
\n
\nThanks
\nG","quoteUsername":"CTI","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">

回复


Baidu