This week on the podcast, Dwayne chats with Marc Trouard-Riolle, about Nutanix Cloud Clusters (NC2) on Azure and how to get started. Nutanix Cloud Clusters (NC2) on Microsoft Azure enables your applications to be run where you want them, on-premises or in the public cloud, all operated as a single cloud.<\/p>

<\/oembed><\/p>

解决了

Windows 2008 R2和Windows 2012 R2 CHKDSK /F Powers Off /挂起系统

C
Userlevel 1
徽章 +11
  • CTI
  • 开拓者
  • 12个答复
你好，
使用AHV 5.01运行3个节点Lenovo HX1310。

我将打开带有Nutanix支持的门票。这更多的是一个仅供参考。

首先看到And SBS 2011标准（又名Windows 2008 R2 X64）。从Hyper-V 2012 R2迁移后。我/我正在遇到系统冻结的问题。我首先以为是Shadow Protect备份引起的，但随后开始在深夜发生。我认为它是WBENGINE服务（又称块级备份）。

我设置了一个新鲜的测试Windows 2008 R2，其中有2卷C：和e：。
当我在C：驱动器上运行Chkdsk时，它到达了末端，第3阶段的第3阶段，然后VM势力关闭。我必须手动启动它。
因此，我在E上尝试了它：没有数据的格式化。我运行chkdsk，而VM的权力关闭了。

更新：刚刚在Windows 2012R2服务器上尝试了相同的CHKDSK /F，并且出现了相同的症状。

提前致谢，

G
图标

最好的答案CTI2017年4月22日，16:21

\nFinal update, it seems that my hanging issue was due to the NetKVM driver. Upgrading the NetKVM to version 1.118 seem to fix it. Server is normal again.
\n
\nI'm going to wait until tech suppport comes up with a fix for the chkdsk solution that is more automated. I don't run chkdsk very often.
\n
\nThanks
\nG","className":"post__content__best_answer"}">
查看原件
\nRunning 3 node Lenovo HX1310 with AHV 5.01.
\n
\nI will be opening a ticket with Nutanix support. This more of an FYI....
\n
\nFirst saw this issue with and SBS 2011 Standard (aka Windows 2008 R2 x64). After migrating from Hyper-V 2012 R2. I was\/am having issues where the system would freeze. I first thought it was ShadowProtect backups causing, but then it started happening late at night. I think its the WBengine Service (aka Block Level Backup).
\n
\nI setup a fresh test Windows 2008 R2 with 2 volumes, C: and E:.
\nWhen I ran chkdsk on the c: drive it gets to the end, stage 3 of 3, and then the VM powers off. I have to start it manually.
\nSo I tried it on the E: that has no data is freshly formatted. I run chkdsk, and the VM powers off.
\n
\nUpdate:Just tried the same chkdsk \/f on a Windows 2012R2 server and the same symptoms appear.
\n
\nThanks in Advance,
\n
\nG","quoteUsername":"CTI","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
该主题已关闭以供评论

2个答复

C
Userlevel 1
徽章 +11
你好，
这篇文章只是一个更新。
首先，最重要的是，我想感谢David Griffin在技术支持方面。他真的加紧了这个问题！！！
这似乎是某种错误，与Windows VM访客上的SCSI_PassThru有关。从我在支持下观察到的是，磁盘是从SCSI克隆到SCISI而没有传递的。之后，过程，CHKDSK /F正常工作。我们在Windows 2012 R2测试VM上首先做到了这一点，以确保其起作用。

然后，我们在我的SBS 2011服务器上执行此任务，并能够运行CHKDSK。希望这能阻止我在此服务器冻结的问题上遇到的问题。

还，
在事件日志中，我会注意到，当服务器启动时，W32Time开始之前的事件日志中的时间启动了数小时。我们应用了KB3134，最重要的是，您需要降低来宾VM。重新启动没有生效！！！

谢谢阅读....

G
\nThis post is just an update.
\nFirstly and most importantly, I want acknowledge David Griffin in tech support. He really stepped up on this issue !!!
\nIt seems to be some sort of bug that has something do with scsi_passthru on the Windows VM Guests. From what I observed with David in support is that the disks were cloned from scsi to scisi without passthru. After that, process, chkdsk \/f worked normally. We did this first on a Windows 2012 R2 test VM to ensure it worked.
\n
\nWe then performed this task on my SBS 2011 server and we were able to run a chkdsk. Hopefully this stops the issue I was having with this server freezing.
\n
\nAlso,
\nIn the event logs, I would notice that when a server would boot, the time in the event log prior to the w32time service starting was off by hours. We applied KB3134 and most importantly you need to power down the Guest VM. Reboot did not take effect!!!!
\n
\nThanks for reading....
\n
\nG","quoteUsername":"CTI","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
C
Userlevel 1
徽章 +11
你好，
最终更新，看来我的挂问题是由于NetKVM驱动程序造成的。将NETKVM升级到1.118版本似乎正在修复它。服务器再次正常。

我要等到Tech Suppport提出了更加自动化的CHKDSK解决方案的修复程序。我不经常运行chkdsk。

谢谢
G
\nFinal update, it seems that my hanging issue was due to the NetKVM driver. Upgrading the NetKVM to version 1.118 seem to fix it. Server is normal again.
\n
\nI'm going to wait until tech suppport comes up with a fix for the chkdsk solution that is more automated. I don't run chkdsk very often.
\n
\nThanks
\nG","quoteUsername":"CTI","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">
条款和条件
Learn more about our cookies.<\/a>","cookiepolicy.button":"Accept cookies","cookiepolicy.button.deny":"Deny all","cookiepolicy.link":"Cookie settings","cookiepolicy.modal.title":"Cookie settings","cookiepolicy.modal.content":"We use 3 different kinds of cookies. You can choose which cookies you want to accept. We need basic cookies to make this site work, therefore these are the minimum you can select. Learn more about our cookies.<\/a>","cookiepolicy.modal.level1":"Basic
Functional","cookiepolicy.modal.level2":"Normal
Functional + analytics","cookiepolicy.modal.level3":"Complete
Functional + analytics + social media + embedded videos"}}}">
Baidu